I have real trouble to get the BD35 to work, unfortunately I am unable to locate the IR receiver to control the player with my BS3 & PUC. Any idea where it is?

Thanks

Karsten 

It's on the right hand side of the disk tray, but to the left of the lettering. I think it's *just* to the left of the first logo on the top.

FWIW, I've found the 'Generic Panasonic Blu-Ray option works fine in the PUC controller.

Alex, great thank you! Now it works. Unfortunately I have only the PUC for the Panasonic DMP-BD10 which works great execept power off function.

Do you have any problems with power Off or On with your PUC? 

 

Karsten 

I can't say I've ever tried powering down the BD35 through the PUC controller. TBH, it's not something I'd worry about, although it's something you might. The last time I checked (which was a few weeks ago), the BD35 wasn't on the PUC controller list, so a software update from your dealer would do nothing.

I'll try and find out if anything is happening for you!

Great, thank you very much!

 (power on works with PUC, just checked this) 

kawo:

Alex, great thank you! Now it works. Unfortunately I have only the PUC for the Panasonic DMP-BD10 which works great execept power off function.

Do you have any problems with power Off or On with your PUC? 

Karsten- 

 

The power-off function works just fine with my BeoSystem 3, but it doesn't work with my BeoVision7. I am using the exact same Panasonic BD10 driver on both units to control my two BD35s. Interestingly enough, I have exactly the same problem using the Toshiba HD-DVD A20 driver to control my two Tosh A35s: power-on works with both the BS3 and the BV7, but power-off works only on the BS 3. It would seem that the fault lies not with the two PUCs, but rather with the BV7.

Interesting! I also have a Panasonic DVD Recorder attached to the same BS3, Power Off and On works without any problem