in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 11-28-2008 11:04 AM by ducha. 3 replies.
Page 1 of 1 (4 items)
Sort Posts: Previous Next
  • 11-27-2008 11:37 PM

    • ducha
    • Not Ranked
      Male
    • Joined on 01-04-2008
    • Wisconsin, US
    • Posts 77
    • Bronze Member

    Beomaster 2400

    I noticed what look like slots on the back of my Beomaster 2400 that could be used for mounting it on the wall. Yet, my manual says that it should be either lying flat or slightly angled with optional feet. Is it possible to wall-mount and if so, are there any issues with doing so?

    Thanks,

    Aaron

  • 11-28-2008 1:46 AM In reply to

    Re: Beomaster 2400

    The slots are where the feet go. Quite rare to find these days! I have seen this wall mounted though I believe they mounted it with bolts through the bottom plate.
  • 11-28-2008 2:28 AM In reply to

    • Dillen
    • Top 10 Contributor
    • Joined on 02-14-2007
    • Copenhagen / Denmark
    • Posts 5,008
    • Founder

    Re: Beomaster 2400

    No problem in wallmounting it. I have a BM1900 on the wall in my kitchen and it's basically the same machine. The only thing is the top lid, in most cases it will not close fully but stop apprx 1mm short. It will hold close though if pushed the last mm.

    Two screws in the wall and just hang the Beomaster. 

    Martin

  • 11-28-2008 11:04 AM In reply to

    • ducha
    • Not Ranked
      Male
    • Joined on 01-04-2008
    • Wisconsin, US
    • Posts 77
    • Bronze Member

    Re: Beomaster 2400

    Thanks for the replies. Good to know that it can be mounted vertically, but still undecided as to whether I'll set it on a shelf or wall-mount it.

    Aaron

Page 1 of 1 (4 items)