My setup is as follows:
I've plugged the Virgin box into the middle SCART socket on the Avant. When I switch on the V+ (using its own remote) it switches the Avant on too (in DVD mode).
The IR blaster is plugged into the back of the Avant and the other end stuck onto the V+
Next I went into the Setup menu of the Avant, went to Sources then DVD. I selected 'Set-top box' and when the menu of available STB's came up I selected 'Pace DSR600'
The Beo4 has no control over the V+ so I repeated the process but selected 'Pace DTR730-IM'
Again no control whatsoever
Where am I going wrong?
32" RF VCR Avant, 2 x 28" VCR Avant, DVD1, Beocom 6000, Beo5, A9 Keyring!