in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 10-23-2008 12:42 AM by KingOfSnake. 4 replies.
Page 1 of 1 (5 items)
Sort Posts: Previous Next
  • 10-22-2008 5:40 PM

    • LarsJensen
    • Not Ranked
    • Joined on 04-25-2007
    • Copenhagen, Denmark
    • Posts 65
    • Bronze Member

    Beovision 7 40" wall bracket

    Does anybody know if it is the same (B&O) wall bracket used for the BV 7 40" regardles of speaker type? Seen af wall bracket for sale that says 'For BV7 40" (and BL 7.4)' but I have the BL 7.2. Can I use this bracket with the BL 7.2?

    /Lars

  • 10-22-2008 6:35 PM In reply to

    • Russ
    • Top 100 Contributor
      Male
    • Joined on 05-07-2007
    • Washington, DC USA
    • Posts 641
    • Bronze Member

    Re: Beovision 7 40" wall bracket

    Assuming that you already have the wall bracket for the 7.4, the answer is 'Yes!'  You'll need a few minutes with a hex-key, but you should be OK.  Barring that, your local B&O shop would be able to order the appropriate bracket for you.

    We kid because we love.

     

    Bang & Olufsen Tysons Galleria

    McLean, VA USA

  • 10-22-2008 7:19 PM In reply to

    • LarsJensen
    • Not Ranked
    • Joined on 04-25-2007
    • Copenhagen, Denmark
    • Posts 65
    • Bronze Member

    Re: Beovision 7 40" wall bracket

    Thanks. No haven't got it yet, but looking to buy it.

    /Lars

  • 10-22-2008 7:36 PM In reply to

    • Russ
    • Top 100 Contributor
      Male
    • Joined on 05-07-2007
    • Washington, DC USA
    • Posts 641
    • Bronze Member

    Re: Beovision 7 40" wall bracket

    Sorry Lars, I got crossed up.  

     Since you already have a 7-2, if you have the wall bracket for it, then you will be able to remove the 7-4 from the BV-7 wall bracket, and replace it with the 7-2 wall bracket.

    We kid because we love.

     

    Bang & Olufsen Tysons Galleria

    McLean, VA USA

  • 10-23-2008 12:42 AM In reply to

    Re: Beovision 7 40" wall bracket

    Be careful, here, I am unsure of what the poster has got exactly but remember, wall bracket mountings are from the 7-32 (i.e. single pole stand), the mountings from the 7-40 stands will not go onto the wall mount fixings!  I would be very careful of what the seller is actually offering, of course if they are selling a wall bracket with a (seperate?) mounting for a 7-4 then the mounting can be swapped - SO LONG AS YOU HAVE THE MOUNTING WITH A SINGLE FIXING POINT i.e. 2 screws!!!!

Page 1 of 1 (5 items)