in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 10-19-2008 6:08 AM by Fica. 5 replies.
Page 1 of 1 (6 items)
Sort Posts: Previous Next
  • 10-18-2008 8:25 PM

    • Fica
    • Not Ranked
    • Joined on 01-13-2008
    • Posts 9
    • Bronze Member

    cannot store tv stand position (MX7000)

    Hello,

     I have an early version of the mx7000 on a motorized stand. I use a Beo4 to control it, the problem however is that I cannot seem to store the startup viewing angle of the stand. What I do is that I use the STAND button to rotate the stand, then I try to store the position by pressing VSETUP/STORE, and the channel indicator on the TV turns red. I switch off the TV and when I then turn it on again, it goes to the old startup position, not the one I chose.

    Anyone have an idea of what to do?

     Many thanks!

     Filip

     

     

  • 10-19-2008 2:02 AM In reply to

    • geearr
    • Top 200 Contributor
    • Joined on 03-27-2008
    • Gold Coast, Australia
    • Posts 301
    • Gold Member

    Re: cannot store tv stand position (MX7000)

    Hi

    On my MX7000, it works as follows:  With TV on, press MENU, SETUP, STAND.  Message then says "turn stand to preferred position".  Use left / right arrows to get correct position and GO to store it.  EXIT and switch off.  When you switch back on, stand will go to the preferred position.

    Regards

    Geoff

  • 10-19-2008 3:08 AM In reply to

    • Fica
    • Not Ranked
    • Joined on 01-13-2008
    • Posts 9
    • Bronze Member

    Re: cannot store tv stand position (MX7000)

    Hi Geoff

    The problem is I have the first generation of MX7000, where the menu is more limited. I don't have a STAND menu item under setup. Thanks though!

     /Filip

     

     

  • 10-19-2008 3:29 AM In reply to

    • beoben
    • Top 500 Contributor
      Male
    • Joined on 04-18-2007
    • Germany
    • Posts 189
    • Bronze Member

    Re: cannot store tv stand position (MX7000)

    I think you need a Beolink 1000 to do what you want!

    I want a BV 10

  • 10-19-2008 4:53 AM In reply to

    Re: cannot store tv stand position (MX7000)

    You have to press STORE twice, while the STAND settings are still displayed on the screen.

    It stores all the pictures setting at once (like Brightness, contrast, etc..).

    p. 

     

  • 10-19-2008 6:08 AM In reply to

    • Fica
    • Not Ranked
    • Joined on 01-13-2008
    • Posts 9
    • Bronze Member

    Re: cannot store tv stand position (MX7000)

    Works! Thanks p.! Owe u one.

     

    /Filip

     

     

Page 1 of 1 (6 items)