in Search
Home Blogs Media Forums Live Forum Archive Forum 2012-2022 Main Web Site
Forums » BeoWorld around the world! » BeoWorld Français » Signal Masterlink
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 08-04-2007 7:56 AM by Goldfrog88. 3 replies.
Page 1 of 1 (4 items)
Sort Posts: Previous Next

  • 05-13-2007 3:24 PM

    • krec
    • Not Ranked
    • Joined on 05-04-2007
    • France
    • Posts 21
    • Bronze Member

    Signal Masterlink

    Reply Contact
    Bonjour à tous, 

    Je compte acquerir très prochaiement un system beocenter 2, et je me demandais quelle était la nature du 
    signal qui transitait dans la connection masterlink ? YUV ? HDMI ? ou autre ? 

    Merci pour vos réponses.

    Eric.
    Filed under:

  • 05-13-2007 3:41 PM In reply to

    • YannChris
    • Top 200 Contributor
      Male
    • Joined on 04-16-2007
    • Larmor-Plage, France
    • Posts 276
    • Founder

    Re: Signal Masterlink

    Reply Contact

    Bonsoir,

    Le cable Masterlink ne véhicule pas de signaux vidéo.

    Il n'y a que des signaux audio et des commandes de contrôle des appareils.

    Le Beocenter 2 sort un flux vidéo en RVB , S-VHS ou composite via les prises du boitier de connexion.

    Yann.

    Ne pas s'en faire et boire frais!

    Mon install en images: cliquez sur mon profil, au dessus de mon avatar - Puis "My files" tout en bas.

    Pictures of my setup: click on my nickname, above my avatar. Then "my files" at the bottom of the page.

  • 05-15-2007 7:39 AM In reply to

    • krec
    • Not Ranked
    • Joined on 05-04-2007
    • France
    • Posts 21
    • Bronze Member

    Re: Signal Masterlink

    Reply Contact
    Merci de votre réponse Yann, 
    Pas de hdmi ou de YUV, c'est quand même dommage :( ...
    Filed under:

  • 08-04-2007 7:56 AM In reply to

    • Goldfrog88
    • Top 500 Contributor
    • Joined on 06-07-2007
    • Melbourne, Australia
    • Posts 83
    • Gold Member

    Re: Signal Masterlink

    Reply Contact

    Eric, the Masterlink signal only carries data, voltage switching (-7 to -15V on pin 11 and +7 to +15V on pin 12---down to -+3 on standby respectively) and balanced audio. The audio is on the following pins, all with Resistance in of 2.2M Ohms, and Resistance out of 75 Ohms at 1V balanced:

    Pin 13: minus Left 

    Pin 14: plus Left  

    Pin 15: minus Right

    Pin 16: plus Right

    I believe that an early version of the ML cable (with four rather than three twisted groups of three) may have been designed for video, but today's ML system relies on a 75 Ohm coax connection back to the main splitter for video distribution. 
Page 1 of 1 (4 items)