in Search
Home Blogs Media Forums Live Forum Archive Forum 2012-2022 Main Web Site
Forums » General Forum » General Forum » Cable Qu for connecting BC9000 to CX50s
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 08-19-2008 3:37 PM by ChrDH. 3 replies.
Page 1 of 1 (4 items)
Sort Posts: Previous Next

  • 08-19-2008 5:16 AM

    • Dave0280
    • Top 500 Contributor
    • Joined on 03-05-2008
    • Birmingham, UK
    • Posts 126
    • Gold Member

    Cable Qu for connecting BC9000 to CX50s

    Reply Contact
    Apologies if this is a silly qu but I have a nice pair of grey CX50s and would love to hook them up to my BC9000. Now, I have some old speakerlink wires and I have the plugs to go into the back of the CX50s. Cutting the speakerlinks (as I had the 4 din plugs on both ends) reveals coax cable yet the wire to the plugs of the CX50s are normal wires - can I connect the two or is a trip to Maplins on the cards and can I get the necessary plugs from there to make my own connectors? Sorry if its a dumb qu but didn't want to connect the speakerlink coax to the normal wires on the CX50 plugs.... Thanks in advance.
    Dave - Birmingham, UK

  • 08-19-2008 7:23 AM In reply to

    • Medogsfat
    • Top 10 Contributor
      Male
    • Joined on 02-21-2007
    • *Moderator* Leeds, Yorkshire
    • Posts 4,045
    • Founder

    Re: Cable Qu for connecting BC9000 to CX50s

    Reply Contact

    You can buy both DIN plugs or ready made moulded DIN cables from maplins.

     

    Chris.

    The use of metaphors should be avoided like the plague. They're like a red rag to a bull to me.

  • 08-19-2008 7:41 AM In reply to

    • Dave0280
    • Top 500 Contributor
    • Joined on 03-05-2008
    • Birmingham, UK
    • Posts 126
    • Gold Member

    Re: Cable Qu for connecting BC9000 to CX50s

    Reply Contact

    Just been searching Maplins - is it this one that will do the job?

     http://www.maplin.co.uk/images/full/rw25.jpg

    Dave - Birmingham, UK

  • 08-19-2008 3:37 PM In reply to

    • ChrDH
    • Top 150 Contributor
    • Joined on 04-16-2007
    • Denmark
    • Posts 493
    • Founder

    Re: Cable Qu for connecting BC9000 to CX50s

    Reply Contact

    Those would do fine. You can also make the cables your self, you can use any cable you like (not too thick) and buy some DIN plugs at maplin or some other place.

    best regards

    Christian

    Beosound Ouverture, Beocenter 9000, Beovision MX6000, Beocord VX7000
Page 1 of 1 (4 items)