Hello All

what STB do i select for control of a sky hd box i cannot find it?

Also i have selected Generic projector in the menu and i still canoot find out where to set up speaker roles for projector setup?

Thanks

hello please help i just got my MK3 and dont knwo what device to choose as SKY HD

i have been into customer service menu and there are cinema timings but no alternate speakers settings liek ti says in the reference book?

hello hwo do i tell if i have 4.24 installed and there is a menu item called 60Hz on or off this is set to no, should i change this to yes?

hello also how do i use the Puc to conrtol the ps3 i know the dealer is goign to flash the puc with PS3 but ps3 uses a bluetooth remote, has anyone done this

Also in the menu for cinema timings it does not allow under 11 seconds to return to TV mode

seanklemis:

hello please help i just got my MK3 and dont knwo what device to choose as SKY HD

i have been into customer service menu and there are cinema timings but no alternate speakers settings liek ti says in the reference book?

hello hwo do i tell if i have 4.24 installed and there is a menu item called 60Hz on or off this is set to no, should i change this to yes?

hello also how do i use the Puc to conrtol the ps3 i know the dealer is goign to flash the puc with PS3 but ps3 uses a bluetooth remote, has anyone done this

Also in the menu for cinema timings it does not allow under 11 seconds to return to TV mode

I cant help you with the Sky HD box, but you can just try all the devices one by one, until you find the one that works.

You can see if you have 4,24 if you go into customer service menu, and look under SW, the top value is the one that should read 4.24.

What do you need to change Cinema Timings for, do you have a projector ?

 To control a PS3, you need the "Sony Playstation 3" PUC in you STB table, and a NYKO remote, this remote is a USB dongle with IR receiver,that you put into the PS3, and then the IR cable from BV7 is put on this USB dongle.

/Weebyx

 

 

hi there i do have 4.24

do you mean this

http://www.amazon.com/PlayStation-3-Blu-Wave-Remote/dp/B000R5H7KE

 

Yes you need the USB - IR device to control your PS 3 with your Beo 4. 

You change to cinema mode by pressing FORMAT 0. Bach to TV mode FORMAT 0 again.

Leave 60 Hz off, if you got a picture on your projector, if you have one.... 

Tell us more about your setup - would make it easier to help, thanks.

Stefan 

seanklemis:

Hello Allwhat STB do i select for control of a sky hd box i cannot find it?Also i have selected Generic projector in the menu and i still canoot find out where to set up speaker roles for projector setup?Thanks

For Sky HD control select 'Pace Sky+' in the STB menu.

Hello All

I now have hade my PUC list updated to 392eu so i can conrtol Sky HD.

What PUC item is for PS3 control as it does not show playstation?

You need Sony Playstation 3 or Sony NS975V.

Stefan 

i have looked through my list and i have PUC list 392eu which is the latest UK version of the list but PS3 or sony xxxxx is not in the list.

 

anyone had PS3 or the song puc added to there list so i can ask there dealer how it is done as i know the puc list overwrites the current list in the TV so i cannot think why its not in the latest list?

You don`t need the newest list. Create your own puc list. Just tell your dealer, which devices are to be controled and he will install them if available.

seanklemis:

anyone had PS3 or the song puc added to there list so i can ask there dealer how it is done as i know the puc list overwrites the current list in the TV so i cannot think why its not in the latest list?

 

The PUC is just called Sony Playstation 3, and the list in your tv does not include ALL the boxes B&O supports, there are more than 300 boxes currently supported, so you just tell you dealer what you need, and he wil put those boxes in you PUC.

/Weebyx