ARCHIVED FORUM -- April 2007 to March 2012READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012
Hi,
my old Beosound 3000 (SW 1.2, small clamper) goes to my dealer tomorrow for a softwareupdate. It's required because I want to use N.Music with a Beoport.
Can anyone tell me what "features" my BS3000 will have except the N.Music-functionality? Does it get PIN-Code etc.?
Thank you for your help
As far as I am aware, there are no additional features other than N-Music/N-Radio. I don't think you get pin code protection.
Certainly, I have had 3000's with N-Music and no pin code protection.
Please let us know if I am wrong!
Regards Graham
When your dealer updates your Beosound 3000 it is likely to be updated to at least version 3.1 which provided quite a lot of changes as follows:-
With the addition of Version 2.0 brought the new functions of N.MUSIC and N.RADIO to be used with BeoLink PC 2/Beoport.
The next major version update was to Version 2.12 which provided the following key fixes:-
The final major release of software was Version 3.1 which provided the following major fixes:-
Regards Keith....
Beovision 7-55 with Beolab 7-4, 9s and 4000s
Beovision 10-40 with Beolab 1s and 6000s
Beosound 1, 5, 2000, and 3000
Beotime, Beotalk, Beocoms
thank you for the detailed info! This is somehting I miss on B&O products, I think there would be so much "hacking" possible ;-)
What about the Pin-Code-Feature? How can I check IF I have this feature when my baby's back at home and how do I use it?
I'm so excited :-)
Good evening, so, my Beosound 3000 is back with version 2.x
There is NO Pin-Code-Feature but N.Music works now. I've just tested it with BMLink for Mac and the BS3000 shows artist or album name :)I'm going to check features as soon as it is connected to a PC for the music.
What scared me at first:
After plugging in the BS3000 the light just lit up for a second and then nothing happened ... after a few seconds the standby-indicator came up. Is that normal?!
I have a Beosound 3000 with serial no. 1554xxxx, currently on sw 2.0.
Is it possible to upgrade it to Software 3,1 (I would like to move my Beosound 3000 to a link room therefore I need Option 6)?
Or is there a limit by 2,12?
Besides the Software Update do I have to change other parts of the Beosound 3000 (like CD interface)?
Thank you for your help.