I have a Beovision LX5000 and a Grundig Micro DVB-T tuner that is B&O remote control enabled. In the TV there is an old sattelite module that i don't use and probably never will (I guess that it ios te Beosat LM module). So I was wondering if anyone know if it's possible to make som internal connections and use the connections for the sattelite module as an internal scart socket for the DVB-T module so i could have both of the external sockets free for other equipment. It would also be nice if it is possible to draw the 12V needed for the DVB-T tuner from the inside of the tv so i can get rid of the power supply for it. There is no service manual for the Beosat LM in the User- & Servicemanual section so if anyone has a diagram for it that could also be helpfull.

Alternativly I would just like to get the 12V for the DVB-T module from the inside. Can anyone point out where i could find that. It would be nice if it was something that would turn on and of with the tv. 

I'm pretty sure the Beosat LM positioner for the motorised dish is 12 volts, so there must be a way of tapping into it.

Andy T.

Peter :

One of our members has fitted an STB-C in an LX6000 so maybe that is the way to go!

I dont need the STB controller since the DVB-T module is allready fitted with a Linkconverter from Stonedesign that makes it possible to operate it with a B&O Remote through the scart connector, so what I am interested in is just to free up one of the external scart connectors if possible.  

Jandyt:

I'm pretty sure the Beosat LM positioner for the motorised dish is 12 volts, so there must be a way of tapping into it.

Andy T.

 I thought of that to but unfortnuality it's only 100 mA and that power supply for the DVB-T module i 1 A. But maybe it's possible to find the 12V vith a higher current another place inside?