Hi All, new to the forum and need a little advice...

I've just got my gear out of storage (they've been there for 4 years) and I know I'm going to have problems linking it all together as last time I ran it as two seperate systems.

In the living room I have 32" Avant with BeoLab 1 (front) & BeoLab 6000 (rear) & BeoLab 2.  I also have the BeoSound 9000.

In the bedroom I have the AV 9000 with BeoLab 8000 (front) & BeoLab 4000 (rear) and a BeoSound 3200. 

Then I also have the BeoLab 3500 & BeoLab 2000 elsewhere in the house.

As far I'm aware, the AV9000 can only be configured as Master but could I configure the Avant as a slave and have it as one system?  Also, if this was possible, would I be able to link the Sky+ to the Avant and still have full control throughout the whole system?

 Thanks in advance.

 Paul.

No. You would have to attach the Sky+ to the AV9000. You will need an STB-C in the AV9000 - they are apparently no longer made though. This is a big problem with the AV9000 - I use mine as a separate system with a second Sky box.

Thanks for the reply Peter.

Does the STB-C connect to the back or is it a module that needs to be installed onto the internals?

Anybody got one for sale...?

It is an internal module. It activates as V.Aux which is not ideal. The Avant works much better with Sky in my opinion.