hi,

I’m trying to configure one of my Beo4 remote to control  a BS9000( as Audio2) and the other BEO4 to control a BC2 ( as  Audio1) but I cannot do it.  I followed the instructions on the Beo4 manual but it’s not working. Even if I have the message STORED on BEO4 display, the AUDIO1 remains as default, so no chance to have access only at my BS9000 ( needs to be set as AUDIO2) as is stated on the manual( I have a BC2 and a BS9000 in the same room). Any chance eventually to control both with one remote in the same room??

Anyone have suggestions???

Good luck and happy new year

Constantine

Hi Constatine,

get your BC2 to Option 1, BS 9000 to Option 4. Now you can control your BC2 by audio commands, BS 9000 by Link-audio commands (Link-Radio, Link-CD...) with both remotes. Maybe you have to add the LINK - button to the list-functions.

Happy new year

Stefan 

thanks Stefan,

I don't have Option4 available on my BS9000 manual( manufactured january 2005) and the RED LED does not blink the moment you set up  Option 4!

I tried Option 6 but it's not working!

Any ideea why?

regards,

constantine

No idea why! Your BS 9000 from 2005 must be a MK III (newest version). Should know option 4....

Option 6 is a slave-option used for link-rooms.

So try BC2 in option 4 and BS 9000 option 1. BTW you must be careful because both systems are in the same room that only 1 System receives the option-code.

Good Luck

Stefan 

Stefan,

job done......BS9000 in OPTION0, BC2 in OPTION6 : both connected by MasterLink Cable!

thanks for your help,

regards,

constantine

Congratulation,

yes, it should work with option 0 and 6 if the systems are ML connected. I did not think about that....

Regards

Stefan