BV8 Switching to an audio source -

Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

Latest post 09-06-2011 3:20 AM by hotknife. 2 replies.

Page 1 of 1 (3 items)
	Sort Posts: Previous Next

09-05-2011 2:41 PM

ibg001
Joined on 04-27-2007
Posts 37

BV8 Switching to an audio source

Reply Contact

Hi,

If my BV8 40 is turned on to Video source like TV (DTV since the analogue tuner is turned off in the settings) and I press a audio sorce like Radio then the display is not turn off. Of course the picture disappears but you can see that the display is turned on but is black. Is the an error that the display is not turned off?

It BV8 is turned off and I press Radio then the music plays and the display i not turned on. Wired.

I have the newest software version.

My BV8 40 is in option 2 and my BS3000 is in option 0 (no speakers).

Is there a reason for this behavior or is at a software error?

Filed under: BV8-40, BS 3000

09-05-2011 3:03 PM In reply to

ClausMikkelsen
Joined on 03-13-2009
Posts 82

Re: BV8 Switching to an audio source

Reply Contact

When switching to an audio source, my BV8-40 turns off the display after about 30 seconds.

I was the second place winner on the BeoWorld May 2009 Prize Draw!

Thanks to BeoWorld for a great site!

09-06-2011 3:20 AM In reply to

hotknife
Joined on 02-03-2008
Solingen/Germany
Posts 552

Re: BV8 Switching to an audio source

Reply Contact

BV8-40 with speakers connected via masterlink with BS4.

The sceen of my BV8-40 turns off (black sceen), if I switch from TV to the masterlink connected BS4. But turns on again (after 30 sec. off) if I`ve to make a modification in the DSS-modul of the telly.

BeoVision 8-40, ATV2, BeoSound 4, Front BeoLab 9, Rear Beolab 4000 MKII, Beo 4

Page 1 of 1 (3 items)