Mates,

I have a surround system with 5s in the front and 3s in the rear.

I have a spare lab 2 id like to connect in the rear to the 3s.

Would i just connect it in line?

Or is there a specific setting on the bv9/bs3 that I need to denote.

MJM

Just connect the rear Powerlink out to BL2 Powerlink input and the BL3s to Powerlink out of your BL2.

Now the BL2 is set up as rear sub.

Stefan

Thanks,

I assumed so just wanted to see if anyone else did it

Mjm

We have our Powerlink run through the walls. If I wanted a rear sub, am I correct I would really need two rear subs? One connected to each of the two rear (L + R) powerlinks and then the rear speaker connected to each sub?  Because of the room layout I can not run a powerlink from one side to the other in the rear. Thus I can not connect both rear speakers to the same sub.

The powerlink for the rear speakers is a single powerlink from the TV, into the wall and then to one Panamax unit in the wall and then in the wall from that unit to the Panamax in wall unit on the other side.