Hi all,

My Beocenter 9300 wich is ten years old doesn't answer to remote commands since recently.

I though it was the remote, but i changed the batteries and it was the same.

Manually or by link, the beocenter works well, only by remote it doen't work.

What can be the problem ?

Thanks for your help

Zazou

Do you have any other B&O equipment to test the remote with?

If not, you can test it if you have a digital camera. Point the camera at the transmitting end of the remote and watch the screen as you press a button on the remote.

If it's transmitting, you should be able to see the infra red LED flash on the cameras screen.

It is probably set to Option 0 for some reason.

On the remote, try STBY, SOUND, 1 , STORE

Should now work!

It was effectively  an option problem.

It works fine now with option 1

Many Thanks !

Zazou

dear all, I have the same problem but your manipulation doesn't work.

Any others ideas?

Does your remote work Tylerdurden?  Check it with your mobile camera as in the earlier post.