in Search
Home Blogs Media Forums Live Forum Archive Forum 2012-2022 Main Web Site
Forums » General Forum » General Forum » Beogram 8002
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 07-02-2007 8:52 AM by mastiff1776. 5 replies.
Page 1 of 1 (6 items)
Sort Posts: Previous Next

  • 06-04-2007 7:40 AM

    Beogram 8002

    Reply Contact
    I have beogram 8002, the stylus moves to place but will not drop onto the record. It seems the play and stop buttons do not work. Any ideas?
    Filed under:

  • 06-04-2007 7:53 AM In reply to

    Re: Beogram 8002

    Reply Contact
    I think I am right in saying that there is a solenoid that controls the arm drop and when this fails, the arm simply stays up. I take it that there is no click when you press the play button once the arm is over the record? The service manual is on site.

  • 06-04-2007 12:00 PM In reply to

    Re: Beogram 8002

    Reply Contact
    Peter,
    Since subject came up I thought I would add a few other issues for my own bidding;-
    I have just purchased a yankie 110v 8002 (started on the sad path of collecting older stuff for fun). A couple of questions?
    1. Who can service this deck.
    2. Can the internal 110v transformer be easily replace for a 220v input transformer. are parts available?
    3. From descriptions (not seen yet), the tangental arm done does come from the rest position. Any ideas if this a common and correctable fault?
    4. Are spares easily obtained for this device?
    thanks
    10%

  • 06-04-2007 12:10 PM In reply to

    Re: Beogram 8002

    Reply Contact

    1. Depends where you are - Martin in Denmark and Tim Jarman in the UK

    2. Not sure as the US one is 60Hz and this could be a problem. The Transformer comes out as a module though.

    3. Not sure what you are asking!

    4. No! But a lot of problems are down to capacitors needing replacing and a few due to the tacho disc going on 8000s. The 8002 should not have this problem as the disc is metal.

  • 06-04-2007 12:43 PM In reply to

    • Craig
    • Top 10 Contributor
      Male
    • Joined on 03-29-2007
    • Costa Del St Evenage
    • Posts 4,855
    • Founder

    Re: Beogram 8002

    Reply Contact
    Mr10Percent:
    3. From descriptions (not seen yet), the tangental arm done does come from the rest position. Any ideas if this a common and correctable fault?

      If the arm works is the same way as the 4000/6000 series. There is a small drive band that moves the arm across the record. Could be this has snapped.

     

    CraigBig Smile

    For millions of years, mankind lived just like the animals. Then something happened which unleashed the power of our imagination. We learned to talk and we learned to listen..

  • 07-02-2007 8:52 AM In reply to

    Re: Beogram 8002

    Reply Contact

    Hello.

    Thank you for your advise. Could you tell me if there is anyone in Australia that can fix this?

     

    Thanks
Page 1 of 1 (6 items)