Hi
Have finallly got round to wiring up the extra speakerr kit I have for my BM7000 to feed my kitchen but I do not have any control of the BM7000 at all. Basically it not receiving any of the IR commands so therefore will not open the relays or turn on the BM7000
I have checked all the wiring & thats OK, I am getting 8.26V from the DC feed (Pink) to the extra speaker Kit & 8.20V to the IR connection,
I have measured the voltage at the receiver on both DC & IR and it is 7.30V.
I have had the receiver working already as I connected it directly via some plugs to check it will work as I am using the latest round type with the extra speaker kit not the rectangular type.
Hope someone can shed some light on the problem
Regards Simon