in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 07-08-2010 5:16 PM by superdario. 5 replies.
Page 1 of 1 (6 items)
Sort Posts: Previous Next
  • 07-04-2010 5:48 AM

    • classic
    • Top 500 Contributor
      Male
    • Joined on 04-16-2007
    • Venø - Struer / Denmark
    • Posts 224
    • Founder

    iPhone - Beolab 5000 (1967)

    I have been setting up a system for digital music on the classic Beolab 5000 of 1967.

     

    Of course the music quality will never be the same quality as you can enjoy by using the Beolab 5000 and the Beomaster 5000 or the Beogram 3000 Thorens as source for your music. Big Smile

     

    I am using these products:

    Squeezebox Touch - NAS media server - iPhone 3GS

     

    All the music is stored on the NAS server (HD)

    The Squeezebox server software is installed on the NAS server / HD

    The iPeng software is installed on the iPhone 3GS

     

    You can now play the internet radio channels and all of your own music on the Beolab 5000 or any other B&O amplifier by using the AUX input.

    You can remote control your Squeezebox with you iPhone 3GS

    You can even install more Squeezebox units in your house and of course control it all by your iPhone

    /Frede

     


    Beolab 5000 -  "If another amplifier sounds different then it needs repair!"

  • 07-04-2010 6:44 AM In reply to

    Re: iPhone - Beolab 5000 (1967)

    A good solution and I am pleased for you.

    However it is frustrating that B&O seems to have these elements itself (e.g. BeoLink Wireless 1) and yet does not join them all together so we can experience what you have got ..........

    First B&O (1976) was a Beogram 1500 ... latest (2011) change has been to couple the BL11 with the BL6Ks *sounds superb*

  • 07-04-2010 7:51 AM In reply to

    Re: iPhone - Beolab 5000 (1967)

    I quite agree, Elephant.

    I'm using my Beolab 5000 together with a Grace m902 DAC and an Airport Express unit. I'm streaming music to the AE from my ReadyNAS server, selected with iPhone or iPod Touch (or using Screen Sharing from one of my laptops.)

    The music is fed to the DAC via optical Toslink, and goes to the Beolab 5000 through an RCA>DIN cable. I'm using the TAPE channel on the Beolab 5000. The music sounds excellent, the convenience is world class.

    Here's the setup (I usually keep the Grace DAC hidden):

     

     


  • 07-04-2010 7:58 AM In reply to

    Re: iPhone - Beolab 5000 (1967)

    If you're not satisfied with the quality of your playback, this may be due to incorrect calibration of the channels. The Beolab 5000 amp uses a direct, phase separated signal (which is the best possible design), but requires manual calibration.

    This is performed through the dials on the bottom of the unit. Consult the manual for the proper procedure. You'll need a mono source during calibration.

     


  • 07-04-2010 11:27 AM In reply to

    Re: iPhone - Beolab 5000 (1967)

    Nice picture and a lovely homage to B&O's rich past

    soundproof:
    (I usually keep the Grace DAC hidden)

    I understand why, Grace (the "lady" on the left), is like the mythical ugly maiden aunt, who should only be seen on family occasions 

    First B&O (1976) was a Beogram 1500 ... latest (2011) change has been to couple the BL11 with the BL6Ks *sounds superb*

  • 07-08-2010 5:16 PM In reply to

    Re: iPhone - Beolab 5000 (1967)

    Nice setups... I'm thinking to use AppleTV as a MP3-Server remote-controllable with my iPhone... This solution is not High-End but good value for money. Does somebody know how good is the internal DAC from AppleTV? The Big Plus is that i don't need to start up my MacBook Pro only to listening music...

    Or should i invest this money for a good DAC connected via Toslink to the AE?

    Thanks for your suggestions

Page 1 of 1 (6 items)