in Search
Home Blogs Media Forums Live Forum Archive Forum 2012-2022 Main Web Site
Forums » Products Related Forums » The Beo5 & Beo6 Remote Forum » Selecting A.AUX in link room, does not work
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 10-28-2007 8:10 AM by stefan. 1 replies.
Page 1 of 1 (2 items)
Sort Posts: Previous Next

  • 10-28-2007 6:03 AM

    • Christian
    • Top 100 Contributor
      Male
    • Joined on 04-16-2007
    • Copenhagen, Denmark
    • Posts 626
    • Bronze Member

    Selecting A.AUX in link room, does not work

    Reply Contact

    I have my LX6000 connected to my BS9000 by a sound-only cord. Therefore there isn't link between the two.

    When I want a more powerful sound I turn on the BS9000, connected to Pentas, on A.AUX. Either I press A.MEM on my Beo4 or A.AUX on the Beo5. Both works fine.

    In my link room, option 4, I can press LINK - A.MEM, but I cannot get my Beo5 to work. I have tried both A.AUX and A.MEM, with link set to 1. Nothing works. I triggers the MCL-2A box, but it does not turn on the ML/MCL amplifier. If the ML/MCL is runnig I can switch the MCL-2A box on by selecting LINK - RADIO and covering the IR emitter, and then turn the wheel, but that is not user friendly.

    Can anyone advise on which IR codes turn on the MCL in a link room, that is in option 4?

    (BTW everything works fine in an other link room, that is not in link option.)

    Living room: BV7-40 mkIV + V8000, BL5, BL3, BM1 and BS9000. Bedroom: MX3000 and BL4500 on MCL2-AV. Around: PentaIII, CX100 and MCX35 on ML/MCL + MCL2-A, BeoPort and BL4 on ML, BS3300 + M75 as stand alone, BC6000 + BC600 and BT1100, LC1, LC2, Beo4, Beo5 and BL1000, BS2 and A8, EarSet2, Apron, Coffee mugs, Enamel Bagdes, Bath towel, Keyring, Books, Lots of miniature and the Bottle opener. Office: BC2300 + BL2500 and BS3. Summer house: BS Century.

    Addicted? Oh no.... ;)

  • 10-28-2007 8:10 AM In reply to

    • stefan
    • Top 50 Contributor
      Male
    • Joined on 04-16-2007
    • 200 miles from Struer
    • Posts 1,733
    • Founder

    Re: Selecting A.AUX in link room, does not work

    Reply Contact
    Hej Christian,

    in my main room A.AUX in of my BS 9000 is connected to A.AUX out of my BS 7000 in a linkroom (audio - no datalink). I cn control the 
    BS 7000 via a MCL 2a in option 4. Works with Beo4 and Beo5. For Beo5 I programmed a macro: Link-CD powers on both systems
    BS 7000-CD and BS 9000-A.AUX (+ Speaker in main room...). In linkroom I can control the BS 9000-CD Changer by Link-CD ( 1 button).
    Powers on BS 9000-CD and BS 7000 A.AUX (connected to an MCL 2a and ML-MCL Converter). So controlling MCL 2a in option 4 via Beo5 works. Link must be set to 1 and A.AUX command to RADIO....(?). Hope this helps.

    Med venlig hilsen

    Stefan
Page 1 of 1 (2 items)