Please help!

I have 4 LC2s and cannot disable the on/off function on any of them. I must be doing something wrong but I can't understand what.

I follow the following procedure as stated in the instruction booklet via my Beo4:-

Press LIGHT then LIST to display SETUP. Press 0, the LIST to display STORE. Press GO, Then 1.

But it doesn't work!

I've tried the above procedure with the lights on and off, but it makes no difference.

As I live in Spain and powercuts are not uncommon, it means that if one has occured whilst I am out, when I return all the lights are on.

Any advice much appreciated. 

 

 

 

 

kokomo:

Please help!

I have 4 LC2s and cannot disable the on/off function on any of them. I must be doing something wrong but I can't understand what.

I follow the following procedure as stated in the instruction booklet via my Beo4:-

Press LIGHT then LIST to display SETUP. Press 0, the LIST to display STORE. Press GO, Then 1.

But it doesn't work!

I've tried the above procedure with the lights on and off, but it makes no difference.

As I live in Spain and powercuts are not uncommon, it means that if one has occured whilst I am out, when I return all the lights are on.

Any advice much appreciated.

You have to continuously touch the half-dome (the sensi-touch field) of the LC2 during that process, otherwise your commands will be ignored. HTH

Thanks a lot, just tried it and it works!

Why don't the instructions mention that small point?

Thanks again - much appreciated.  

kokomo:

Thanks a lot, just tried it and it works!

Why don't the instructions mention that small point?

Thanks again - much appreciated.

Well, it’s mentioned on page 20 in the english version of the manual ("The three types of reprogramming are all carried out by holding the dark front half-dome (the sensi-touch field) and simulateously pressing the sequences of keys on your Beolink Terminal") but hidden so efficient that many people (including me) just didn’t find it when first trying ...

Just 14 minutes from question asked to problem solved!!
That's what we like to see.
Wonder how long it would have taken on the official site?

Andy T.