Display on Beolab 3000 in connection with Beosound 9000 -

Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

Latest post 01-31-2011 3:34 PM by joeyboygolf. 2 replies.

Page 1 of 1 (3 items)
	Sort Posts: Previous Next

01-31-2011 1:59 PM

Ferdinand
Joined on 05-04-2008
Malmö, Sweden
Posts 159

Display on Beolab 3000 in connection with Beosound 9000

Reply Contact

Hi All,

I have Beoloab 3000 connected to BS9000 and was wondering how to get the display working. I have checked the forum and also both user manuals but still no display ....

I have 8pin powerlinkcables and the speakers are set to 'audio'

Am I correct to understand that all should work, or should I chang some set-up to my BS9000?'

If yes, how

Maybe the displays are broken )on both?) how to test this?

Thanks .. and good luck with tonights pricedraw!

BS9000, Beolab 3000, Beocenter 7002, RL60.2, beo4, BV10

01-31-2011 3:24 PM In reply to

stotty1111
Joined on 12-16-2007
UK / France - Nth Worcestershire/Finistere
Posts 924

Re: Display on Beolab 3000 in connection with Beosound 9000

Reply Contact

sEEMS AS THOUGH YOU ARE USING A mK 3 PL CABLE WHICH IS NOT FULLY WIRED (sorry about caps) a mk fully wired pl should get the display working!

tony

I always try to operate using/following the KISS principle -- Keep it simple stupid!

01-31-2011 3:34 PM In reply to

joeyboygolf
Joined on 04-16-2007
Ely, Cambridgeshire, UK
Posts 3,252

Re: Display on Beolab 3000 in connection with Beosound 9000

Reply Contact

All powerlinks are 8 pin but not all pins are connected in all versions of the cables!! Mark I or Mark III cables are no good for your job.

You must use Mark II powerlink cable or the new fully wired cables which have recently superceded them.

Regards Graham

Page 1 of 1 (3 items)