MX 5000 motorised stand -

Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

Latest post 09-25-2008 4:22 PM by solderon29. 3 replies.

Page 1 of 1 (4 items)
	Sort Posts: Previous Next

09-25-2008 10:09 AM

gus01
Joined on 05-06-2008
Posts 1

MX 5000 motorised stand

Reply Contact

Cannot seem to get the stand option to come up in the picture menu

Have checked relevant circuits for supplies and dry-joints stand checked on another set and is ok

Can anyone help?

09-25-2008 11:36 AM In reply to

Medogsfat
Joined on 02-21-2007
*Moderator* Leeds, Yorkshire
Posts 4,045

Re: MX 5000 motorised stand

Reply Contact

Welcome to Beoworld, and thank you for supporting the site with your silver membership Smile

There is a correct sequence for attaching a motorised stand so the TV recognises it. Start from scratch by unplugging the stand from the TV then disconnect the power to the TV. Plug the stand cable back into the TV then restore power.

Chris.

The use of metaphors should be avoided like the plague. They're like a red rag to a bull to me.

09-25-2008 3:49 PM In reply to

joeyboygolf
Joined on 04-16-2007
Ely, Cambridgeshire, UK
Posts 3,252

Re: MX 5000 motorised stand

Reply Contact

Did all MX5000's have stand software included in the chip? Somewhere in the distant past I seem to remember changing a chip for this very reason. Or was that a 5500?

nobby will know for sure. Suggest you pm him.

Regards Graham

09-25-2008 4:22 PM In reply to

solderon29
Joined on 06-24-2007
Posts 235

Re: MX 5000 motorised stand

Reply Contact

If your BV5000 has nicam fitted,it should work with the stand.There are no menu's for the stand with this set,you just press PICTURE then the left/right or up/down keys,depending upon which handset version you have.

You also may need to programme the tv to option 1 and option 5.

Regards,

Nick

Page 1 of 1 (4 items)