|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Latest post 04-16-2008 2:15 PM by Jandyt. 12 replies.
-
04-16-2008 3:53 AM
|
|
-
-
-
tournedos
- Joined on 12-08-2007
- Finland
- Posts 5,808
|
Jandyt: My guess is that the Beovox Penta is therefore 140 cm, give or take an inch.
It's higher than that; I'm 183 cm or something, and the 'voxes are almost up to my chin (and no, my head isn't that big). I'll post an exact measurement in the evening, if the question remains still open then
|
|
-
-
a2bur
- Joined on 04-20-2007
- Posts 262
|
Measured mine and are 1490 mm or 58" high ( labs are 64.5" ). Richard
|
|
-
-
-
Daniel
- Joined on 04-17-2007
- Svinarp, Sweden
- Posts 1,284
|
a2bur: Measured mine and are 1490 mm or 58" high He asked for cm!
Beovision LX5500, BeoCord V6000, BeoSound 9000, BeoLab 8000, BeoLab 3500, BeoLab 2000, BeoVox1, BeoCom 6000, Form1, LightControl 1
|
|
-
-
a2bur
- Joined on 04-20-2007
- Posts 262
|
Sorry , I'm an engineer and work in mm , an alternative measurement is 1490000 microns or 3712/64 ths or if you have a horse 14 and 1/2 hands. It you need to calculate the internal pressure the formula is < 1 " of Mercury at 62 degrees F. = 1.132 foot of water = 13.56 inches of water = 0.491 pound per square inch > . Surveyor's measure 7.323232323232323232 lincs or .007323232323 furlong . Sad Richard with a old maths book .
|
|
-
-
Daniel
- Joined on 04-17-2007
- Svinarp, Sweden
- Posts 1,284
|
a2bur: Sorry , I'm an engineer and work in mm It´s OK! I´m an engineer and work in m.
Beovision LX5500, BeoCord V6000, BeoSound 9000, BeoLab 8000, BeoLab 3500, BeoLab 2000, BeoVox1, BeoCom 6000, Form1, LightControl 1
|
|
-
-
Puncher
- Joined on 03-27-2007
- Nr. Durham, NE England.
- Posts 9,588
|
Daniel: a2bur: Sorry , I'm an engineer and work in mm It´s OK! I´m an engineer and work in m.
I too am an Engineer - I work in hope!
Generally speaking, you aren't learning much if your lips are moving.
|
|
-
-
Medogsfat
- Joined on 02-21-2007
- *Moderator* Leeds, Yorkshire
- Posts 4,045
|
Puncher: Daniel: a2bur: Sorry , I'm an engineer and work in mm It´s OK! I´m an engineer and work in m.
I too am an Engineer - I work in hope!
I'm a Parisian frogman and I'm always insane (in seine) groan....................
The use of metaphors should be avoided like the plague. They're like a red rag to a bull to me.
|
|
-
-
Puncher
- Joined on 03-27-2007
- Nr. Durham, NE England.
- Posts 9,588
|
Medogsfat: I'm a Parisian frogman and I'm always insane (in seine) groan....................
Watch yer legs!!
Generally speaking, you aren't learning much if your lips are moving.
|
|
-
-
tournedos
- Joined on 12-08-2007
- Finland
- Posts 5,808
|
Medogsfat: I'm a Parisian frogman and I'm always insane (in seine) groan....................
Well, I'm an engineer, I was working at the pub for the last four hours, and my Pentas are still 150 cm high! Off to the Wednesday© thread...
|
|
-
Page 1 of 1 (13 items)
|
|
|