in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 05-14-2010 3:42 PM by Daniel. 8 replies.
Page 1 of 1 (9 items)
Sort Posts: Previous Next
  • 05-14-2010 5:54 AM

    TV stand unknown

    Quick question,

    For which TV set is the stand made for?

    Mounting holes can be set in two positions 71cm and 79 cm.

    It doesn't fit on a MX6000, that's what I know.

    Thanks guys!

    B&O item 1, B&O item 2, B&O item 3,...................B&O item 735

    Beovirus? What's that?

  • 05-14-2010 5:58 AM In reply to

    • Craig
    • Top 10 Contributor
      Male
    • Joined on 03-29-2007
    • Costa Del St Evenage
    • Posts 4,855
    • Founder

    Re: TV stand unknown

    Possibly for an LX series then. They both use the same stands but use different top plates.

     

     

    CraigSmile

    For millions of years, mankind lived just like the animals. Then something happened which unleashed the power of our imagination. We learned to talk and we learned to listen..

  • 05-14-2010 6:05 AM In reply to

    • Peter
    • Top 500 Contributor
      Male
    • Joined on 12-28-2009
    • Sweden
    • Posts 134
    • Bronze Member

    Re: TV stand unknown

     

     

    yes, it looks like the one I have on my LS5500 so it should be the same like the LX i suppose.. the ones with speakers on the sides

     

    /Peter

  • 05-14-2010 9:16 AM In reply to

    • Daniel
    • Top 50 Contributor
    • Joined on 04-17-2007
    • Svinarp, Sweden
    • Posts 1,284
    • Founder

    Re: TV stand unknown

    It's similar but not identical to the stand for my LX 5500. The unfolded parts are on my stand opposite each others. On yours it looks like one of them ends before the other. I'll attach a photo of mine.

     

     

     


    Beovision LX5500, BeoCord V6000, BeoSound 9000, BeoLab 8000, BeoLab 3500, BeoLab 2000, BeoVox1, BeoCom 6000, Form1, LightControl 1

  • 05-14-2010 1:24 PM In reply to

    • Beowulf
    • Top 500 Contributor
    • Joined on 04-16-2007
    • Derbyshire
    • Posts 143
    • Bronze Member

    Re: TV stand unknown

    Possibly an LX6000?

    Beowulf

  • 05-14-2010 1:36 PM In reply to

    Re: TV stand unknown

    Thanks guys!

    Again, what a wonderfull place to be hereSmile

    According to the dims (products) of the LX 5000 & 6000 this would be 78 & 86cm width (difference 8cm), so that would match my dims I measured!

    B&O item 1, B&O item 2, B&O item 3,...................B&O item 735

    Beovirus? What's that?

  • 05-14-2010 3:19 PM In reply to

    • Beowulf
    • Top 500 Contributor
    • Joined on 04-16-2007
    • Derbyshire
    • Posts 143
    • Bronze Member

    Re: TV stand unknown

    You are welcome, I will take a closer look at My LX6000 in the bedroom and get back to you tomorrow.

     

     

    Kind regards

     

     

    Dave

    Beowulf

  • 05-14-2010 3:37 PM In reply to

    Re: TV stand unknown

    Thanks Dave, very kind of you!Yes -  thumbs up

    B&O item 1, B&O item 2, B&O item 3,...................B&O item 735

    Beovirus? What's that?

  • 05-14-2010 3:42 PM In reply to

    • Daniel
    • Top 50 Contributor
    • Joined on 04-17-2007
    • Svinarp, Sweden
    • Posts 1,284
    • Founder

    Re: TV stand unknown

    Leslie:

    Thanks guys!

    Again, what a wonderfull place to be hereSmile

    According to the dims (products) of the LX 5000 & 6000 this would be 78 & 86cm width (difference 8cm), so that would match my dims I measured!

    I believe LX5500 and LX6000 has the same width, both have a 28'' screen.

     

    Beovision LX5500, BeoCord V6000, BeoSound 9000, BeoLab 8000, BeoLab 3500, BeoLab 2000, BeoVox1, BeoCom 6000, Form1, LightControl 1

Page 1 of 1 (9 items)