Hi,

I have bought a old Beogram 6002 in a second hand market (22 Euro !!!). A nice vintage turnable.

After cleaning, oiling and tuning everything (following the service manual that I have download on the net), it works fine.

The only problems I have are :

1) the lamps indicating the RPM 33 or 45 are not very bright : I have still to check the voltage

2) I don't see any stylus pressure adjusting part, except the counter balancing weight wich is to be place  so that the arm is floating when the pressure is set to 0 gr. I think that there a part lost lost.

Could somebody send to me a picture  or a drawing of this part, with, if possible, some dimensions, so that I could make a one by myself ?

(I could find a little balance to mark the scale).

Thank you very much

Welcome to Beoworld !

The tracking force is set using the pointer at the right side of the tonearm.

Martin

Thanks Martin, I've found it (the cursor is so discreet and usualy hidden when the tonearm is on the right side). Thanks again for such a quick answer.

Freddy