in Search
Home Blogs Media Forums Live Forum Archive Forum 2012-2022 Main Web Site
Forums » Products Related Forums » The Workbench » Beolab Penta 2 No Stand by - Need help
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 05-22-2009 3:29 PM by BegBeo. 5 replies.
Page 1 of 1 (6 items)
Sort Posts: Previous Next

  • 05-22-2009 4:35 AM

    • BegBeo
    • Not Ranked
    • Joined on 04-23-2008
    • Stockholm - Sweden
    • Posts 60
    • Gold Member

    Beolab Penta 2 No Stand by - Need help

    Reply Contact
    Hey, guys, have a Beolab Penta 2
    No stand-by - Fuses located in the bottom part is OK
    Does anyone have knowledge which mistakes are behind this error.

  • 05-22-2009 4:57 AM In reply to

    Re: Beolab Penta 2 Going from red to green but no sound - Need help

    Reply Contact

    Hi,

    how is the Penta connected to the amp? PowerLink or Cinch or Speakerlink?

    Could be a defekt Powerlink cable. Or wrong source selected...powerlink used, but line selected.

  • 05-22-2009 5:06 AM In reply to

    • BegBeo
    • Not Ranked
    • Joined on 04-23-2008
    • Stockholm - Sweden
    • Posts 60
    • Gold Member

    Re: Beolab Penta 2 Going from red to green but no sound - Need help

    Reply Contact
    I am very sorry I wrote wrong, I have no stand-by, even if the fuse is ok.

  • 05-22-2009 5:12 AM In reply to

    Re: Beolab Penta 2 Going from red to green but no sound - Need help

    Reply Contact

    No standby LED?

    Then either the fuses are defect, there are 2 of them... 1x for the standby transformer and 1x for the power amp.

    Check with an ohmmeter wether there is some resistance on the power cord, there should be something around 300 Ohms. If there is a open loop, then the fuse or the standby transformer is gone...

  • 05-22-2009 5:18 AM In reply to

    • BegBeo
    • Not Ranked
    • Joined on 04-23-2008
    • Stockholm - Sweden
    • Posts 60
    • Gold Member

    Re: Beolab Penta 2 Going from red to green but no sound - Need help

    Reply Contact
    Thank you for your prompt response will look at it today and hear from me again how it was.
    regards
    Jan

  • 05-22-2009 3:29 PM In reply to

    • BegBeo
    • Not Ranked
    • Joined on 04-23-2008
    • Stockholm - Sweden
    • Posts 60
    • Gold Member

    Re: Beolab Penta 2 Going from red to green but no sound - Need help

    Reply Contact
    Hello again, Beolab Penta som are OK = 300 Ohms and the Beolab Penta with error had = 275 Ohms.
    What do you think?
    regards
    Jan
Page 1 of 1 (6 items)