Thank you very much for your help.

I need some direction on adding or should I state getting my Beolab 4000's to work with the 7-55. I have them hooked and set up and ran the set mode. However, they don't turn on when the TV is turned on. If I go into Options and select Adjustment and highlight video speakers 2 or 3 the speakers turn on and sound great. When I select store the

mika - I just tried another source and the stereo light came on. Relief. I then switched back to FM and as I went up and down the dial the stereo light would come on at different stations. Maybe the stereo light just needed a kick start from another source. All is better now. Thank you for the help.

All, My stereo light is not coming on anymore on the 900M - checked the bulb and it is not burned out. Signal strength from the FM stations are coming in very strong. I am not sure what the problem can be, but any help in this matter would be appreciated. Thank you.

Martin, It is a small hole near the outter edge of the paper cone and the black rubber glue ring, if that is the correct term, the paper is still present and fits nicely into the space it once occupied.

I did take the grill off and found that the woofer has a hole. Now the question is how to replace the woofer. This is all new to me so any help is greatly appreciated.

Craig, Thanks for the info.

I want to remove the grills from one of my Beovox 1000's to check a speakers. I am new to the vintage scene and do not want to damage the fabric, by just going at the grills. Does anyone have any tips for a newbie? Also, if I should find that I need a new cone or something am I out of luck or can something be used in place of OEM? Thanks Chas.

Mika and Martin, Thanks for the warm welcome. I will first try to remove the knob and see if cleaner and oil will work, before I attempt to remove the case. I had to put some oil on the small screw on the knob because it wouldn't turn. I let it sit overnight and will try to remove it todayt. I will post again on my success. Again, thanks for the

First, I would like to say that I am new to BEOWORLD, but not the product. I purchaed a Beomaster 900m and am very happy with the overall condition and function of the unit. However, the bass control is very hard to turn. I was looking for help on how to fix the control, such as remove the cabinet or just pull the knob and spray some contact cleaner