|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Browse Site by Tags
Showing related tags and posts accross the entire site.
All Tags » repair ( RSS)
-
hello all, I have just recieved my replacement beomaster 5500 (having had a bad experience with the last 'bargain'), and most functions appear to be operating correctly. however..... the only thing i am getting on the left hand of the display is the word LOCKED this light is fixed (even in standby...
-
Found a pair of Beolab 6000 at a deal! Unfortunately, the surrounds need replacement. Anyone have experience with these speakers specifically and this problem? Possible to order the entire bass drivers directly from B&O? I was told that replaceing the drivers will also require calibration of the...
-
Martin, Eugene, Peter, thanks very much for your replies and suggestions. Having checked the back again it was indeed the main left speaker (lower socket), and there was some resistance when plugging in, the speaker was silent on all sources including radio and I checked the balance which was fine with...
-
Hello all, this is my first posting as I have just put together a beosystem 5500 with four beovox s45 speakers and I am in love! The system looks and sounds like it was made yesterday and the MCP is quite a conversation piece. I do have one small problem though - the left hand socket for the secondary...
-
Hello all, after a a period of some months, I tried to play some records on my Beogram 4000 with no success. The tone arm does not move across! I removed the aluminium plates and I saw that the motor doesn't turn. I measured the voltsge on the cable motors and is 0 Volts? Do you have any idea about...
-
I have a pair of Penta MK1 with one kind of minor problem, the "door" (where the controls for sensitivity, bass level and power mode) can't be closed. When I press it to close it, it just clicks but it never locks the "door", it just opens at once. I wonder if anyone knows how...
-
Good day. I have a BeoCom 6000 hanbdset that does not want to register with the base anymore. It all started with a battery problem. But the "main" handset now refuses to register. The "second" handset became the "main" and the main does not work. The screen writes "HORS...
-
I've just recently picked up a pair of S45.2's. The drivers are intact and sound great, however the cabinets (rosewood) could benefit from a bit of refinishing. Nothing major... just a little scratched and faded. Anyone have experience refinishing these? Any special precautions I should take...
-
I'm in need of some advice on restoring a pair of Beovox s45-2's, but before I ask my questions, I'd like to say how much I've enjoyed reading through this site and following the conversations of people who admire the B&O line of products as I've begun to in the last couple of...
-
Hi this is my first post in this forum and i hope i am posting in the right section, i was given a beosystem 5500 I am an electronics fan and loved the system at first sight, when i tried to connect everything worked except the speakers, i am a computer technician so i opened the unit and found that...
|
|
|