Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
The BeoLink Active and BeoLink Passive with software version 1.5 can now handle A.AUX command. If you want to upgrade you have to buy an exchange module from your retailer.
-
Couldn't find any info so this is just a tip. If you're using BeoPort with IR-eye and BMLink you can modify your FrontRow.scpt to activate the excellent program "SleepDisplay" when someone is pressing the STANDBY on Beo4. This requires that SleepDisplay is installed. (You can also press CTRL+SHIFT+EJECT) In the FrontRow Script add
-
The recommendations from B&O: Viewing distances 26” 32” 42” 50” 65” 100” Standard Definition (NTSC) 2.3 m 2.8 m 3.7 m 4.4 m 5.8 m 8.9 m Standard Definition (PAL) 1.9 m 2.3 m 3.0 m 3.7 m 4.8 m 7.4 m High Definition 1.5 m 1.9 m 2.5 m 2.9 m 3.8 m 5.9 m Full High Definition 1.0 m 1.2 m 1.6 m 1.9 m 2.5 m 3.9 m 7 x
-
This is a new installation since yesterday so the problem has always existed. =) As you describe with the handshakes sound very logical so I think the problem must be in i the software/firmware. I will look into the version later, but I'm afraid the version is 1.3, because it's a brand new BeoLink Active. If not I will try to upgrade it to 1
-
I have a problem! I have a B&O solution with BeoSound 4 as an audio master, one BeoLab 3500 in one Linkroom and a BeoLink Active with IR-eye in another room. In main room the A.AUX is connected to a common DVB-T receiver and the there is no problem selecting A.AUX from the LIST on Beo4. The same method is used when selecting A.AUX in the Linkroom