Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Hi all! Is it possible to have for example an audio source connected to a Beovision 8-40 (V.AUX) and then distribute it to a BeoLink Active? Or does this require an AudioMaster or a B&O linkroom TV?
-
I totally agree with you Daniel. When speaking about the surround sound the BL 7-6 isn't the perfect speaker as a center but I don't think the BL 7-4 matches the size of the TV. I think I will start with the wall bracket for the TV and have the BL 7-6 on a table/shelf below. I wonder how the BL10 will look together with BV7-55? I think I have
-
I don't think there is any support for any Windows x64 OS?!
-
From another post: "If you have a second Beo 4 you can configure it to constant link mode* by doing the following (it will always send LINK prior to other commands except TEXT): - press STANDBY and LIST at the same time (display shows ADD?) - press >> until display shows CONFIG? - press 2 0 0 2 (display shows LINK ON) - press EXIT Repeat
-
I have tested it and the combination shall be RED then press GO (NOT RED and GO at the same time)
-
This software update was made for ML-Gateway only... BeoVision 8-40 is now Master Link Gateway (Type 1798-1799) compatible.
-
You can also try the "Film Mode ON/OFF" via the customer service menu: The menu can be accesed by pressing RED + GO while the cursor is placed on the CONNECTIONS field. Monitor Information Adjustments -> Film Mode
-
A new update for BV8-40 is available: SW Build 68 (Q-update) This might be an Quality Update for this issue mentioned above?
-
This can be fixed in the menu of the "source-selection" that you have for example PC. Click MENU twice in the PC source, other possibilites there you should have a "size"-option.
-
I think it's possible, check if the command V.AUX is the correct one to use. In some cases you have to use the actual number instead. (for example L-V.AUX = 130. I'm using this command to activate EyeTV) if command is 130 then .... TIP: If you want to see which IR-code the BeoPort is receiving add the following code in the FrontRow-script: In