|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
@kingofsnake - I think the tone of asking if it's a "new fetish" or if "anyone gets off on this" was deemed negative. It's all about sharing something of pride with folks that share your passion. I know people that share pictures of their new car, new boat, or whatever the same way.
-
It's actually on the drop down door for your MCP5000 - set the volume as desired and press control, store, balance right.
-
RIP, David. A real loss for us all.
-
If the MCP5000 and Terminal 5000 work fine from your link room, the problem sounds like it is definitely the IR receive circuit of the BM5000 itself. Since the BM5000 was very popular, you may want to find a replacement on eBay. Just an option if repair is too difficult or costly.
-
I'll second the replacement foams from goodhifi. I've been able to repair about a dozen speaker pairs without issue using his foam surrounds. Take your time, work slowly and carefully. The video shows exactly how to do it. I use a battery to help center the woofer in the voice coil gap. Never had a problem.
-
I have also used this successfully to clean up the brushed aluminum of by equipment with excellent results.
-
I bought a pair of S45 6302 that needed the fret material replaced. After reviewing typical speaker grill material, I found some of my wife's craft fabric to be a very close match to texture, thickness, and weave. It was 28 count black linen. I was able to purchase a large enough piece of fabric through a dealer on eBay. Just wanted to share my
-
Thanks. So is there a ready made cable I can use to connect the audio output from an Avant to my BS5000?
-
Yes, the other end would go to your speaker output of your stereo. You would use either the DIN connector or the push connector, but not both at the same time.
-
That is an alternate connection for the speaker input. It is a DIN style connection that is run in parallel with the rear plugs, so you can use either connection point based on your preference. The connectors are available on eBay.
|
|
|