|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Hopefully I can now post more than a few words at a time I searched the forum and see other people have had this problem, and that sometimes it comes down to there not being enough wires in the um, wire. And indeed I saw the LINE wire from the bt1200 only had 2 wires inside it. Ahah I thought....so I changed to another with a full compliment of wires
-
Surely the DVD 1 is a deserving candidate? Singularly unimpressive performance from a stupendously overpriced underdesigned eyesore.
-
But what about the beotalk 1200. No joy if plugged in to the phone part of the filter, ditto if it's also in the modem bit via some adapters..... I feel I must be almost there, no.....? Thanks
-
Hardly worked out as such. More trial and error really, given that I haven't the faintest idea what I'm doing. I now have the base plugged in to the ADSL filter modem bit.
-
I googled RJ11 and saw it looked like my "Z Blocker DSL filter" So I tried this instead of the basic splitter which came with all the handsets, and hey presto, success.....I can now make and receive calls. However, I have the beotalk 1200 plugged in to the the larger of the 2 sockets but that doesn't seem to answer a call as it should
-
Hi Keith. Now I'm really confused. There is no plug into the base (pstn). It's just a wire which dissapears in to the unit. And there are only 4, not 5 wires on the plug at the other end of the pstn wire....
-
Keith, Indeed, on all of them (4 x bc6000's and a bc2 too )
-
The phones are connected as a number stored on one handset registers on the others. However, the red light on the phones are blinking away. "LINE BUSY" apparently, yet when I reconnect my bt phone that works fine. What am I doing wrong?!? Thanks Dan
-
I'm trying beleive me buy I type a load of stuff and it wont let me post. Grr. I'll try again....
-
I have just acquired a set of beocom 6000's and a pstn base all of which were used together by the previous owner. I know the phones are talking to each other as
|
|
|