|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
I decided to charge it again, maybe... Again 1 full night on the charger, the red dot lights again during the charging, and today, everything working like before! Ok., this mistake is solved now.:) But all the other problems still here. Anyone has some ideas, how to solve these? Thanks: Charles
-
Favorite? Bell &Ross. Maybe i like these brands with "B & ..."? But i don't have any Bell&Ross watch. Don't have so much money to spend it for these watches! Spend all my money for B&O things!
-
tournedos: But I can think of one more test - while the TV is on, rotate it to one side by hand (slowly...). Then turn the TV off. If the stand (and stand interface) are working, it should return to the center position. Thanks! No success.:( Charles
-
ridax: Maybe the charging doesn't work in the remote? It works every time, but now, something is defect from one minute to the other... The red dot lights during charging...
-
bayerische: How long since it worked flawlessly with the battery? I believe leaving the battery empty for a long time will kill it. The remote itself wasn't often used, but when i try to use it, it works! After discharging and charging, the remote works regular. And now this. The remote works 1 day before werry well, just now, something is wrong
-
New problem: I charged fully the remote, but it works only 1 seconds, then it give up.:( If the remote is working, it try to lift up the display, but this works also 1 s long, so just a few mm's, and then dead. It don't happen before, the BL7000 was chargeable on a regular basis. One full charge was enough for a normal time period of operation
-
PhilLondon: Zugn: So you mean, that the problem can't be with the television itself, not with the SW version, etc.? Could be the TV as well unfortunately. But do not panic yet! :) I don't panic, but i see the trouble now with the software refresh in the future...:-)))))
-
tournedos: Furthermore, go to the setup menu of your tv. Do you see "stand" as the last selection down under "sockets"? If not, the TV and the stand are not communicating. I have a MX6000 sw 3.1, a Beolink 1000, a BL7000 and a Beo 4, and the only one of those that is able to rotate the stand is the Beo 4... Regarding the stands
-
Thanks Phil! So you mean, that the problem can't be with the television itself, not with the SW version, etc.? Ok., i will try it, and let you know about the progress! Thanks! Charles
-
Thanks!;) I think, the Beolink 7000 is still the best remote controll on this planet, so this one must work, for sure!:) I read somewhere about two capacitors, but see also a lot more, so this sounds me more logical to change all these! Thanks!:)
|
|
|