|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Hello, Do these work together? And can be turned with BL1000? BR, Pekka
-
[quote user="camshaft"] I agree - I don't think the idea of the numbers arranged in a circle was so profound that any other phone using the same layout is a "rip off". If I recall even nokia had an older phone years before the serene with the number buttons arranged in a circle. [/quote] Maybe, and we had an Ericson phone with
-
Hello, did my first timed recording with the Beocenter 9500. I couldn't figure out, how to set the ending time for recording. Do I need a beolink 7000 to set it? (I'm having only BL1000 and Beo4.) Or is it always recording until manuallly ended, casette ends, or to the end of time or casette brokes, in case of reverse mode? Pekka
-
Ok, now tested and outcome was positive. ie. connecting BG 9500 direct to Ouverture, selecting A.AUX from Beo4 starts the deck to play. Stop pauses and 2nd stop will retract the arm. Go will start playing again. So, perfect so far. Now just need to design a neat switch box and route link-line pass the pre-amp, and it's done. Mika, you happen to
-
[quote user="Hardwriter"] I think you'll find Topfield's listed as "TFXXXX". The list includes the 5000 and 5800 PVRs. [/quote] Yes, TF for TopField, but those do not exist on the north Europe list. There is not any TFxxxx models listed. Also, TF5000 and TF5800 are not commonly marketed in Finnish DVB-T/C market. Pekka
-
Anyone has an idea, why the Topfield DVB boxes don't seem to be on North Europe list? To my understanding they are quite popular here, in Finland anyway. Guys who installed my Avant, told that the older version, that would maybe be TF5100, is supported, but I do not see even that one on the list. I'd be happy to have TF600 there, though. sigh
-
Now, to make this more complicated, and interresting, I'm going to add some kind of a audio switch, also, to the AUX of the Ouverture. This, because I have my iMac also connected there and want to switch between iMac and Beogram. If I do, as I intended above, connect link pins straight with a cable, and the switch is in iMac position, pressing A
-
[quote user="ridax"]But if you make a special cable with the datalink signal crossed over between the pins and the audio going through a RIAA it should work.[/quote] I'm going to solder the cable anyway, so i'll fetch some 7 pin DIN's and cross the link pins in one cable and bypass the audio through the pre-amp using RCA. Would
-
Hi, in the FAQ, there is mentioned, that unscrew the datalink pins if connecting to a 5 pin DIN socket. Do I need to open the connector, or use pliers to screw them off from outside. I do not have access to the connector just now, so can't check it out. Another thing, is there some gimmick to connect Beogram 9500 to an Ouverture so, that it can
-
A great thread. Thanks Graig! Reminds me to check my MX5500 speakers also. Somehow diregarded them as foam rot suspects. Then maybe ordering the foams together with the ones to my Beovox C75:s. Pekka
|
|
|