Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
Page 1 of 1 (5 items)
-
Hi, the arm lift solenoid of my Beogram 1202 sometimes sticks and only resets when I turn the mains off then on. Are these solenoids able to be serviced or can I obtain a replacement from anywhere? Thanks Richard
-
Hi, I have an SP14 cartridge currently installed in my Beogram 1202. It sounds ok but the treble extension is limited. Would an SP12 stylus work properly in an SP14 cartridge? Thanks Richard
-
Hello, I've recently bought a Beogram 1202 off of Ebay. It works very well, except the previous owner has removed the muting relay, leaving just the cueing light in operation. The signal cable from the arm is soldered directly to the output cable. Is it possible to get a replacement relay from anywhere? Thanks Richard
-
Hi, thanks for your reply. The turntable is running at the right speed, it's just that as I'm rewiring the arm I thought I'd service the other bits. The centre bearing in more modern turntables usually has some sort of Hypoid oil in it. Any ideas or should I leave it alone? All the best Richard
-
Hello, how do I lubricate the turntable bearing and with what? Are there any other parts that require grease etc? Thanks for any suggestions Richard
Page 1 of 1 (5 items)