|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Congratulations to everyone! A nice haul for all the winners!
-
I would start with two LX280x TV's and take modules from the donor unit. It's a huge job if you want it to be 100% as new, thinking about the many capacitors that needs to be changed. The LX models are already very reliable compared to it's high age.
-
-
-
Jeg brugte en trælim sidste gang, det fungerer ganske udmærket. Den binder fint på ophænget og kurven, og det ser ud til at mange anbefaler denne type til arbejdet.
-
I have three Beolink 1000 remotes that I want to sell. All in working condition, descriptions below; Number one (to the left in top picture) is without scratches on top, writing has partially worn off on "up" button and some of "1" and "7" buttons are missing. Underside is good, some paint stripped off on one side. Number
-
Hello Jamie You can use any MMC20 (S/E/EN/CL), SP15 and the older MMCxxxx (3000/4000/5000/6000). Be aware that there is a slight chance of some units to have age-related problems like hardening of the suspension inside. There is also the possibility of getting your cartridge retipped by Axel Schürholz at http://schallplattennadeln.de/ He will replace
-
You just need to buy 2 pin DIN speaker plugs, which had been a standard for B&O. If you are going to connect it to a B&O receiver, I would suggest to buy two male plugs and two female plugs. You can buy assembled cables, like these: http://www.ebay.co.uk/itm/Speaker-Cables-2-pin-DIN-Pair-3-Mtrs-B-O-CX-/130509133666?pt=LH_DefaultDomain_3&hash
-
The problem with compressed music is referred as "Brickwalling", slamming the levels as close to 0 dB as possible. It certainly fits some undergenres of modern techno, but not rock music.
-
Hej Casper, Der findes ingen antiskating på en tangentialpladespiller da nålen ikke oplever nogen form for skating-kraft i den konfiguration. Jeg vil nærmere gætte på at det er en sensor som trænger til at blive justeret. Pickuparmen er dæmpet af en mekanisme som sidder på den lille plastikarm til hæve
|
|
|