|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Do you use a Lintronic code translation device? If so, have you ever used Command 232, the command set related to serial communications? If so, I have some questions for you. Please PM me. Thanks.
-
#8 Polish refers to the finish level of the stainless, which is a mirror finish.
-
If you have the metal brackets that were attached to the tops and bottoms of each door, have you considered just going to your local glass shop and having them fabricated, then gluing on the brackets? Some of the brackets on the doors I had came off. I had to re-glue the brackets back to the glass. It was a straightforward process - Attached the brackets
-
Looks really nice! About two years ago, I also restored a Beomaster 4500 to sell. The mirror panel was hacked up and there was no way it could be saved. I did find out that the panel was just a thin veneer of polished aluminum with a thin layer of mylar affixed to the surface for protection. In removing the panel, I did find sources for the gauge of
-
No joy. Thanks for the reply though. Does anyone know what kind of discrete component exists on the left side of the board, approximately 3cm below the LED, with the component side facing up. On my board it is light blue and has the inscription "3.64G" on it, along with some sort of symbol. Where there was voltage running across the two electrolytic
-
I've got a Beolink 1000 remote that doesn't work. It is the version that has the clear film holding the copper convex contacts over the PCB. At first, I thought the battery compartment was corroded, so I bypassed the compartment and wired power directly to the PCB solder pads. No luck. None of the buttons appear to work, so I don't think
-
Hi Russ, Thanks for the reply. One last question. Will a cable like this one work? http://www.amazon.com/VGA-RCA-Component-RGB-Cable/dp/B000FM3EQ0 Or, is there more involved in converting the signal? Thanks, John
-
Thanks for the info! What mode is the set available to use the component video input? V.AUX? Regards, John
-
Hi, Does anyone know how to use the VGA connector on the back of an Avant US, type 8490? I want to connect my Mac to the set and watch movies via iTunes. Any help would be appreciated! Thanks, John
-
That would be great! I appreciate the help!
|
|
|