|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Hello everyone, Recently, my parents bought me a Beosystem 6500 for my college dorm room. I've noticed that the volume level is stronger out of the right channel than the left channel. Also, when I start to exceed a volume level of about 34, I begin to get distortion out of the left channel. Once the system has been playing at a louder level for
-
Hello everyone, I'm wondering what I should use to clean the shiny surfaces of my Beosystem 6500. Also, is there any kind of polish I can use on the metal that won't cause damage to the finish? Thanks in advance, Aaron
-
Hello everyone, I recently acquired a Beosystem 6500. I was wondering how I might go about cleaning the tape heads and the CD player. Is there a certain cleaner I should use or just the conventional cassette cleaner tape and laser cleaning CD? Any help would be greatly appreciated? Thanks, Aaron
-
Hello, I've got a Beosystem 6500 and a Beogram TX-2 turntable. I understand that I need an RIAA preamp in order to connect the TX-2 to the 6500 system. I'm wondering: 1. Can anyone make any reccomendations as to what make or model RIAA preamp would be best suited to my system? 2. Would there be any loss in sound quality with the preamp? Is it
-
Hello, I read in an earlier post that you can connect a B&O turntable to the Beocenter 2500. If this is true, can someone tell me what turntable models will be compatible? I currently own a Beogram TX-2. Thanks, Aaron
-
Thanks for getting back to me. I do have another question. I found the plastic slotted screw behind the tone arm pivot, but the screw seems to be locked into place with a snap washer. I tried turning it with a small screw driver, but couldn't get it to budge in either direction. I'm hoping I don't have to remove the lockwasher because of
-
Hello, I'm new to this forum and B&O products. I recently acquired a beogram TX2 and my dad a beogram 5000 from a friend of his. For both machines, (especially the 5000) it seems that the needle barely clears the record surface when starting and cueing the tone arm. A slightly warped record will cause the needle to scate across the top. Is there
|
|
|