Ok. This sounds interesting. Do you use the original PS3-Menus of the config tool on your Beo5? Or did you program totally new ones? At the moment i have to press v.mem on the Beo5 and have the buttons of the PS3 on the next page. Why do you (mr anders(son)) need a BM1 if you have a PS3?? I installed yellow dog Linux on the PS3 and have a complete computer

If i buy the Schmartz-thing, what do i get? Is it a sticker? Or an USB-dongle? And the most important question: How am i able to use the ON/Off-button with the beo5?? I have added the "V.MEM" Menus of the PS3 with the beo5-config-tool and installed the NYKO-USB-dongle and i am able to control 100-1% of the PS3, only on/off misses. Which buttons of the

Hello! I use the USB-IR dongle of the Nyko and it works fantastic with my Beo5 (PUC of BV7-40 MkIII). How am I able to switch the PS3 on/ off with the Beo5? Do I ´have to add some commands? I used the standard commands offered by the configuration tool.. Thanks for help TS4

Hello! I use a Playstation 3 as blu ray player for my BV7-40 MKIII. They are connected via HDMI. Some of the blu ray discs - although they have no regional code - show no picture (black screen), but only sound (e.g. blu rays of Elton John, Bruce Springsteen, ...)!! I tried a different HDMI 1.3 cable, but still have the same problem. What´s the

Hallo zusammen! Habe eine PS 3 als Blu ray-player am BV7 angeschlossen. Bei einigen Discs habe ich über HDMI kein Bild (Bildschirm schwarz), sondern nur noch Ton (z.B. Elton John disc)!! Die Discs sind regionalcode free, bei einer disc ("nur 60 sek") laufen einzelne Szenen nicht! Woran kann das liegen? Habe bereits in ein besseres 1.3

Hello, i found the PS3 in the config tool of the Beo 5. Is it possible to control the PS3 with Beo5??? The PS3 is normally controlled via bluetooth and cannot be controlled by IR!! Has anybody the solution for this? If it works this could be a nice blue ray-player for my BV7.. Thanks TS

Danke für den Tipp Ralf, leider wird bei der Umschaltung an der Box auf AC3 der Ton am TV ausgeschaltet ;-( Nur über den Scart-Anschluss wird Ton, dann aber leider nur 2-Kanal, über den BV7 ausgegeben. Über den elektrischen S/P dif-Eingang des BV7 kommt bei Umschaltung der Box auf AC3 - damit optischer Ausgang der Box mit AC3- leider

the box sends an optical signal => i can see thee red light.. When it is true, that the BV7 notices when there is an electical signal the problem has to be with the transformer or the electrical cable. can you give me a link where i can read how to check if there is an/ the right electrical signal? i have searched for it but nothing found... thanks

thanks, but it does NOT work in my case ;-( any other idea? thanks ts

Hello, i have a problem to digitally connect my settopbox Dbox2 to the BV7. I want to use the digital AC3 sound of the box and therefore i have connected the box via scart (AV1 for the picture) + spdif (for the sound). I had to convert the optical signal of the box to an electric one (cinch) for the BV7. How am i able to tell my BV7 to use the sound