|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
[quote user="BOBrb"] Gerade flimmerte wieder so ein Spot für eine 50 " Kiste mit Triple-Tuner und 3D für 999,- EUR über den Schirm. Wo liegt hier eigentlich noch der Unterschied. Im Prinzip kann man sich die inzwischen ansprechend designten Kisten lieber mal alle drei Jahre neu kaufen bevor man Geld für einen Kleinwagen
-
Hi Oasis, connect your ATV 2 not only via HDMI but also via a converter like this: http://www.amazon.de/gp/product/B004O2P0CS Then you can hear the sound of the ATV 2 in your linkrooms. Good luck and merry christmas! /Räuber
-
[quote user="Nidi"] Heute von einem B&OHändler im Facebook eingestellt...... wie gefällt er euch? http://www.facebook.com/pages/BANG-OLUFSEN-ZÜRICH/325005044002 [/quote] Es könnte genauso gut ein Loewe, Samsung oder Panasonic sein. Aber es ist natürlich auch schwierig, einem Flachbildschirm ein außergewöhnliches
-
Hallo Tito, der Gefen Switch wird auch im General Forum empfohlen. Voraussetzung für die Nutzung mit B&O-TV's ist die Möglichkeit der PUC-Steuerung, und da werden sicher nur wenige Switches unterstützt. Schau mal hier: http://forum.beoworld.org/forums/p/39990/331907.aspx#331907 Unter 200 EUR sollte möglich sein, obwohl dies immer noch ne Menge
-
Thanks Keith! I probably want to buy a Beo4 1710, not because of the Technisat but because of the Bluray-Player. With Beo4 1625 you always have to press the yellow button to send an action! But I often want to hear radio with my Technisat over a Beolink passive without switching the BV 7-40 on. On Beo 4 1625 I have to press LINK DTV and then GO 6 to
-
Hi Keith, do you have the PUC list also for the Beo 4 with Nav-button (1710)? /Räuber
-
Hi moxxey, on my new BV 7-40 3D the stand moves into a programmed audio position. Only if the TV is off and I press RADIO or CD it doesn´t move. But probably this is intended from B&O. I assume the latest software is on the new BV 7-40 3D and maybe it´s also available for your BV 7. /Räuber
-
Hallo Alex, falls Dein MX7000 keine Masterlink-Buchse hat, kann man ein Masterlink-Modul evtl. nachrüsten (falls es noch zu bekommen ist). Die BL lässt jedenfalls darauf schließen. Allerdings reicht es nicht aus, dann mit dem MX7000 auf Linkquellen zuzugreifen (der MX7000 wäre dann der Master im Hauptraum). Es muss für Deine
-
Hi Razlaw, ok, but thank you very much for your support. Probably your BV´s need a software update to make it work. I want to ensure that it works properly with my new BV 7-40 3D. So probably someone else can answer the question in my first post... /Räuber
-
Very crazy! Please check the following with BV 7 and BV 10: Press DTV and wait until picture appears and the motorstand are in video position. Then select P.MUTE or AV DTV. The motorstand should turn to the programmed audio position.
|
|
|