|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
Page 1 of 1 (7 items)
-
Jammer, echter helaas is de Beovision 7 van 2005 op een ander chassis als de nieuwere. Normaal gesporken zou zo een tv toch 15 jaar mee moeten kunnen. Dit eerste chassis was niet zo goed. Mij andere B&O producten (heb al meer asl 20 jaar B&O) gaan erg lang mee.
-
Hello, have also a BeoSystem 3 with a 60" Panasonic screen. Spend a lot of time to control the screen via an IR link. In order to switch of the screen together with the BeoSytem 3. Later I foundout that this screen will (depending on the settings) automaticly swith on or off depending on the input. All works very well, I am using the B&O central
-
Hello, does anybody know where I can find a list of which external receivers are supporte by the set top box controller of B&O? Regards JR
-
Heb nieuwste software update in Beocome 5 een in de nieuwe centrale, is nog steeds een puinhoop. Gesprek op de beocom5 en ook (wel in mindere mate) op de 6000 handset valt regelmatig weg. Heb alles terug gegeven aan de dealer, weet niet of ik nog op een weer nieuwere software versie ga wachten of toch nog maar een 6000 handset erbij te kopen. Om eerlijk
-
Hello, I have 3 B&O tv's Beovision 7-40, Beovison 10 and a Beo System 3 (with a 60 inch Pioneer Kuro screen) On the Beovison 7-40 I have the build in DVB (T-4042) of B&O, works fine, but no HD. On the two other systems I use the Scena 5 sat reciever. These worked okay, but with 3 month both Scena 5's broke done with different issues
-
I just receive a BeoCom 5 with table speaker (and Beocom 5 base-station). First of all there is no mentioning of the IP or the VOIP possibility, the only evidence is the small connector on the base-station. So I have no clue if or how VOIP works. Secondly is the quality of the sound and microphone on the handset very poor. But the worse part is after
-
This happened to me one time with a stand on a Beovision 6-26. On this system you connect the stand with a 4 pin connector. This connecter you can connect wrong, you should look for a indication so both male and female connectors are in line. Hope this is the same for your avant system Good luck Joop
Page 1 of 1 (7 items)
|
|
|