|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
wtlc2zpx - do you also have an avant?
-
which box have Virgin given you? and do you know which stb table you have on your avant? you will be able to find out which stb table you have by pressing tv, then menu, then with the menu open press 00 then GO. Then on Monitor information press Go, you should then see your STB version. I might be able to check if you box is on this list.
-
Sorry just re read your post and you have an Avant. Not sure if a new chip is available for it which carries the new boxes. Again ask your dealer they should know. Vinnie.
-
Yes but not directly. You have to use the on board STB control on your television. Bang & Olufsen have just updated the PUC codes again and added more UK cable and sat boxes including the virgin v+ box. If your television is in the current range you should be able to get your dealer to update the STB list. Needs to be done by your dealer as they
-
-
have you tried switching the cables over to see if there is an issue with the cable?
-
As far as I know you cannot distribute digital signals to link rooms, audio or video. If you convert the signal into analogue it will work.
-
Hi I would try and unplug the BeoVision from the mains for 5 mins, sometimes there is a block/freeze/lock caused by the update, sometimes this just sorts out issues that make no sense, try it, worth a shot and could save further hassle. Not too sure about the 5.1 issue tho, although reading other posts about ps3 it seems to work when you change settings
-
Just tried programming my Beo5 including the PS3 in the set up. The volume control still works on mine. Just out of interest are you getting error messages when you download your config onto the Beo5? I have found that if you get the error message some of the features might not work.
-
When you want to use the volume why not try going back to the zone/picture/stand page and see if that will work. Not sure why it wont work in the PS3 page, just checked the IR commands and they are the same as any other source.
|
|
|