|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
My query was relating to any fine tuning settings you may have changed when first installing the BS3. I already have the Bravia and the BS3 will arrive later in the month. After hearing from my dealer that it will work okay, 'with some tuning', i was curious to hear feedback from other members as to what the picture settings they used to achieve
-
Hi All, This could possibly be a replication of an earlier post, so i apologise in advance if that's the case. Can anyone offer some guidlines or pointers in tweaking a BS3 for use with a Sony Bravia LCD. Thanks, Ash. P.S. B&O screen is not an option at this point in time, but don't think i've not thought about it ;-)
-
Thanks Moxxey, much appreciated!
-
Hi, Are any of the members here B&O dealers? I have a couple of Q's. Ash.
-
Hi All, I just recently changed the covers of my Beolab 9 speakers, if anyone has to perform this task, i created a quick how-to guide, if you have any questions don't hesitate to contact me. http://www.myotherdrive.com/file/330.022811.05092008.92844.0009fi/HowTo-Beolab9-Covers.doc Ash.
-
I looked at doing this to my pair of BL3's, i had to buy two Powerlink to male RCA (part code 6270856), one for each speaker which then connected into a cable US sound adaptor cable (part code 6270433), which basically has two female RCA cables on one end and the headphone end that goes into the iPod or similar MP3 player. In the end i bought a
-
Definitely the black, could have been the flash or lighting when i took the picture.
-
I put them in the Sale section for £150, the black ones cost me £350 from my local dealer. They're quite light however the boxes are rather large, i'll see if i can find out what the cost for shipping would be.
-
Can't believe i didn't pick that up, i think i've been staring at the remote for too long. Thanks very much for your help Sal!!
-
Hi All, Does anyone know how i can assign on of the source buttons on my beo4 to a-aux? Or is there a way to get that source in the list or option menu? I can't seem to figure this out. Thanks, Ash.
|
|
|