Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
I have a pair of BeoVox 140 cieling mount poles that I am prepared to sell. PM me if you are interested. Regards Richard
-
Hi Did you find one of the modules for a BV3-32? Did you get a quote from a dealer? I have just brought an imaculate BV3-32 for 400 euro but it came without the module If a module is reasonably priced then I might upgrade but then I would need to start buying BeoLabs Is it possible to drive the tape inputs of a quad BeoMaster (3400 or 6000) from the
-
Looking for one of these record/playback heads or a complete donor machine with fully non open circuit record/playback head. The head should have resistance between pairs of terminals and between all terminals and the case (earth).
-
Hi I have renovated 4 of these, a BM4000 and a BM4400 and they all needed capacitor kits that you can get with a very nice diagram from user dillen. I would also recommend changing the two large capacitors in the output stage which dillen can also supply but are not part of his basic kit. If the trimers look dodgy then also change these and once you
-
I had similar patterns with an MX3500 and it was caused by a dry joint on one of the capacitors on the video board on the back of the tube. See this post for tips on finding them http://forum.beoworld.org/forums/post/90730.aspx Having fixed a few of these types of B&O tv I would suggest always resoldering the usual dry joint culprits because even
-
Hello I have a BM8000 & a BM6000 and they both ran very hot even at zero volume before a capacitor change and a setup in accordance with the service manual. The no-load current and output offset amplifer settings on the main amplifer boards are the important ones to get right and you will need a DVM because they need to be set to 18mV and +-5mV
-
-
Hi I have just aquired a BeoCord 1700 that has a fault and I need the service manual but it's not currently availbale on the site. Does anybody have a pdf of the circuit diagram? Regards Richard
-
Thanks Martin You have a PM :) Richard
-
Hi I am trying to restore the tape units in a BC7700 and a BC8000. Both units appear to be identical and have failed for the same reason i.e the drive delts have broken. However, the belts have not just physically broken, they have somehow changed into sticky lumps of rubber that have stuck to the capstan, motor pully and anything else they touch. I