1: The glass is easy to fix. Unscrew one screw located in the lower left side of the glass (from underneath obviously). Gently push the whole glass frame to the left about one centimeter to unlatch it. It should now be possible to lift up the whole plastic frame with the glass. Gently remove the old sticky tape from the glass and the frame (don't

You should open the BC into service position and have a look from inside what happens when you try to open the doors. Four or five screws in the back and some in the front. With them removed you can lift the top of the beocenter just like the hood on a car. It is hinged in the front. It could be that the doors just need some lubrication, or maybe they

The old XBOX uses RCA codes, a standard protocol for controlling DVD players. I don't know if this will help you much, since I dont know how the beo5 remote control is programmed. Here are some links that may help you: About the RCA protocol: http://www.sbprojects.com/knowledge/ir/rca.htm Under "Remote buttons" you will find a table describing

Thanks for your input, Keith! The curving is getting gradually less and less apparent from right to left. I drew up the black bars to illustrate how the picture looked when i display 4:3-content on my xbox. I bought the tv earlier this year, and i think the problem has been there all the time, I just haven't noticed it before recently. There is

Man må åpne anlegget og sette det i serviceposisjonen. Tror det står beskrevet i servicemanualen. Du trenger torx-verktøy. Jeg synes det var litt knotete å komme til for å få renset mitt, men etter mye om og men gikk det.

Du må nok ha aktive høyttalere, men du kan også bruke to vanlige effekttrinn og en overgang fra powerlink til RCA-inngangen til effekttrinnet. Da kan du bruke effekttrinnet til å drive vanlige høyttalere. :) Det som er fjernet kan like gjerne være en gammel analog satelittdekoder eller noe slikt.

Hi guys! I have another challenge for you. [:-)] With your help the stand is now working perfectly. What is bothering me with the set now is that the picture is slightly curved on the top-right part. When i zoom the picture (with Format-theonethatzooms), the curving is more visible. Above is a simple illustration of the problem. Any ideas? I can't

The electronics workshop I've been working on this project at has been closed due to exams and summer vacation since early May. When it reopens in august I will try to finish a working prototype. I have some exciting plans for a masterlink/mythtv-based home entertainment system for my apartment.

Haven't tried, but can't see why it should not work.

I've also considered using the codes directly from the remote by using a TSOP7000, but I have opted to use the wired solution since it will enable me to control the 3rd party device from the link-system.