Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Search

Page 2 of 22 (212 items) < Previous 1 2 3 4 5 Next > ... Last »
  • Re: MX6000 Dead!

    Very common problem sir.There is a capacitor in the lopt stage that becomes dry jointed and arcs.This can eventually cause the lopt transistor to fail too,hence the dead set,as the psu shuts down. Mail me for more info,if you are confident to repair,don't go there otherwise!!! Nick
    Posted to The Workbench (Forum) by solderon29 on 01-07-2012
  • Re: cd50 MAB8050H microcontroller chip

    I reckon I've got a salvage panel with that chip on Jason.I'll look over the weekend as it's buried in the vaults!! Regards, Nick
    Posted to BeoWorld Private Wanted (Forum) by solderon29 on 01-07-2012
  • Re: Connecting an old Beogram5500 to modern speakers

    It seems that you are connecting your active speakers via the headphone socket of the Beomaster?This works obviously,although unorthodox.This means that the Beomaster is amplifying the signal from the Beogram,and you can control the volume.If you connect the Beogram directly to the speakers,you will lose control of volume and remote control of the Beogram
    Posted to General Forum (Forum) by solderon29 on 12-22-2011
  • Re: Beovision datalink compatibility with Beosystem 5000

    As mentioned earlier,the BM5000 was only designed to interface with a Beocord VHS91 vcr.This machine had a 5 pin din socket allowing the BM to use the vcr as an audio recorder(as tape2)and control it from the MCP.You could also of course play tv or tape sound sound from the vcr. The data comms in the BM5000 and later generation products such as Avant
    Posted to General Forum (Forum) by solderon29 on 10-25-2011
  • Re: Beocenter 3500 restoration

    Yes indeed,it would have to be two transformers I think.Don't think there would need to be any difference between 3/4000 in practice,as long as the rating was suitable for the 4000? The second supply is not crucial,you could probably stabilise it too,and be better than the original? I remember now of course that the turntable motor is a different
    Posted to The Workbench (Forum) by solderon29 on 08-21-2011
  • Re: Beocenter 3500 restoration

    Nice unit,and well worth repair indeed.I think your replacement bridge recccy is too small,and may not last long!!The original type,or very similar are still available though. The humming transformer was indeed an "achilles heel" with this and other similar designs.The idea seemed to be to encase the C core type transformer in resin,inside
    Posted to The Workbench (Forum) by solderon29 on 08-20-2011
  • Re: Beovision MX 4000 Dropping into Standby

    This is a very common problem with this chassis.The set has a safety protection system that will shut the set down (standby)in case a fault occurs. However,in many cases this can also be due to "dry" soldered connections in the power supply stages,particularly C12,adjacent to the main smpsu transformer It's well worth checking this,but
    Posted to The Workbench (Forum) by solderon29 on 08-20-2011
  • Re: connecting old to new

    One small disadvantage of connecting active speakers to the pre-amp outputs,is that the muting does'nt function.This might not matter if you only have speakers connected to the Beomaster,but if you have a link system in use too,switching on the system in a link room,will put the active speakers on in the main room also.Better praps to connect the
    Posted to General Forum (Forum) by solderon29 on 06-17-2011
  • Re: Beovision/Virgin Tivo/Hdmi Splitter problem

    Is your splitter HDMI 1.3 spec I wonder,and HDCP compliant? By deduction,as you are only experiencing problems since installing the new pvr,the problem is there. The new Virgin pvr is quite something,and may have all sorts of interacting nonsense present on it's output.Sky hd pvr's for instance,won't output if they can't establish that
    Posted to General Forum (Forum) by solderon29 on 06-10-2011
Page 2 of 22 (212 items) < Previous 1 2 3 4 5 Next > ... Last »