Hallo Nidi!Nach kalten Lötstellen habe ich schon das letzte Mal mit einer Uhrmacherlupe gefahndet, weil auch die MELF-Widerstände schon mal lose Lötstellen haben, es dürfte aber praktisch nichts mehr vorkommen. Die Elkos werde ich dann Wohl oder Übel rauslöten müssen und einzeln untersuchen. Da komme ich aber erst

Hallo!Habe seit heute wieder einen Defekt in meinem MX 5000. Vor ca einem halben Jahr habe ich den DSP-Trafo und den RP37 getauscht, bis jetzt lief er dann. Jetzt war der BU (schon durch einen S2000 ersetzt) kurz. Neuen BU 508 (habe momentan keinen S2000). Lief auch für eine Minute, aber das Bild war irgendwie zu schmal und hatte starke Rücklaufstreifen

Oh yes, of course, if the old glue is still on the glass, it can be a perfect frame! But does this happen often?

Hi! A flat screwdriver would do a good job to remove them. But why? For regluing them you must know the exact position and this is in the cabinet itself. Otherwise, they will crack soon again.

Hi Derek!With "this product" you mean the plastic veneer? I've found http://www.tokan.de/d-c-fix-shop/ or http://www.berlinwallpaper.com/dcfix/Woodgrain.htm but they have only few designs. You can goooogle yourself with "d-c-fix". And they must have it in do-it-yourself-stores to have an impression. Chris

Hallo!Ich habe http://www.windlinag.ch/bo/user_guides/audio/beosound2_f_d_i_gb.pdf gefunden, und auf seite 24 (deutsch) steht was von Doppelpfeil links (SS ?!?) Gruß Chris

Hi Derek!The pins in a DIN-Connector should be numbered from 1 to 5 (on the plastic). The easyest to find is the "2", it is the pin in the middle which is ground of left and right together, then "5" = right = red wire and "3" = left = other color. The pins "1" and "4" are record out. If the pins are

Hi Derek!Sorry, I don'f know the different species of rosewood or wood at all. I was looking for a veneer with fine grain, which I can stain with the color and tone I like. And yes, it is raw wood! You should handle it like any other new furniture!, But by the way, What about trying some self adhesive plasic veneer (in German DC-Fix Folie). I had

Hi Beoaus!If the veneer is still complete you can try as follows: remove the whole veneer with a knife and a hairdryer, clean the plastic body surface with sandpaper or something and re-glue it with contact-glue. If the wood is already into pieces and some edges are lost, you should think about some new veneer. You can go to a cabinet maker for sone

Hi!Storing the settings you made is "play" and leaving the menu without storing is "stop". But when you have a B&O product connected, it should be recognized by itself and it has to be connected to the mains first, and then the tv-set.Chris