Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
wonderfulelectric: Or maybe the speakers aren't good enough to reveal the difference. Get the Beosound 4 if you want something convenient. It is lower maintenance than the other ones. Why do you think its lower maintenance than the other beosounds? Do you think i should go for the 3200 instead?? Beosond 4= sheep plastig receiver aginst 3200? Regards
-
I just wounder if anyone can answer my question how the Beosound 4 sounds compered to the other Besounds in B&O:s pruductline? And i want to now if anyone have a more spesific technical faktoids about Beosound 4? What brand or spec DAC (D/A converter) it uses, and is it more up to date than beosound 9000 and 3200 if you dont thinking of the special
-
wonderfulelectric: Note that BeoLab 8000 came out over then yrs ago. The amplification section in BL8000 wouldn't even be able to compete with a budget amplifier of today. The frequency response is bad, damping factor also bad, slew rate very bad, noise bad so upgrading it with Ice will definitely make a marked improvement. Digital amplifiers aren't
-
wonderfulelectric: The BL8000 will most probably be upgraded if it continues to remain in the lineup. The BL8000 was introduced more than ten yrs ago. The build-in amplifiers probably suffer from higher distortion of every kind and higher noise levels than most affordable amplifiers of today. Technological advances in the area of amplifiers are introduced
-
Beolab 9 behöver också fullmatad powerlink.. Blir ett högfrekvent brus och ingen musik alls typ med vanlig powerlink, därför jag undrar...
-
I saw that the bl4000 has being upgraded with ice power so the question is when would the bl8000 be upgraded? And would the bl 8000 have som benefits in soundquality with ice power? Should i wait to buy bl8000 or what should u do in my situation?
-
I´m thinking that the BS3000 is a design ikon but old now, so the new BS4 is much more 2007 but a little to much plastc.. How much better is the sound from BS9000 then? According to the specs they are the same?? Do the have burrbrown DAC or ? Frequency range 20 - 20,000 Hz, +/- 1 dB Signal-to-noise ratio Typical 101 dB, A weighted D/A convertinig
-
Som rubriken lyder vilken är att föredra? Jag ska koppla ett par Lab 8000 + lab 2 till en beosound 4. Vill få den bästa ljudkvalitén som bara går därför undrar jag om fullmatad powerlink kan låta lite bättre än vanlig? Någon som känner till om det finns någon tillverkare som
-
Okey men blir det stereo då? Om jag bara kör en powerlink till lab 8000 och sedan delar den till nästa lab 8000? Tror ni att detta blir det bästa ljudet då man slipper lab 2:ans filtrering och kör bl8000 fullrange,?
-
So the better chois is the besound 4 then?