Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Hi.... On the AV 7000 there is the V. AUX.....could I connect in a CMM -10 CD changer there and operate it ....by pressing video...the way it works off tape 2 on say a Beocenter 9000???? There is no tape input on it.... Thanks>>>
-
ahhhh thanks Peter...just saw that...3108 to 3138....are just as you say..
-
Hi Graham and others.. We replaced the C2103 with exact replacement.. still not working.. I see in the diagram that there is a TR 6108 (BC 338-16) in the same circut and a R 3116...but in the parts sheet , it does not list a R 3116 for specs.. Any other ideas??
-
Hi Keith and others... With your help...both Penta II's are working...but only with the powerlink converted to speakerlink and in auto... they go into standby and active as they should.. They will not work with straight Powerlink.. THe screens are not working in any way... Ideas...
-
THanks Keith....will do this AM....!!
-
In the auto position the light goes green for 5-6 seconds....and when you are sliding between auto and L position on the switch...you get sound normal level sound for just that 1/2 second.... In the auto position, if you turn up the volume alot...you can hear music...though very low and distorted....
-
All the capacitors and resistors look good on the PCB 2 board....we replaced all of the Transistors (except TR 3....couldn't find one).... Same problem persists...turn it on...and light goes from red to green for 15-20 seconds...you get some sound for a 1/2 second when you switch from auto to left.... Could this be the NTC 330k ohm...resistor on
-
Happy B-DAY !!! from the USA.....Keith.... I'd like to thank you for all your help and technical skill on the board...
-
Hi guys....are the complete amp boards available still?? I've still not sorted out the problem with my penta 2's..... Thanks..
-
Thanks for your response... They hooked up to power, no powerlink plugged in...and put the voltmeter on...and adjusted them with no load and cold... After they adjusted them...are the same...will only play for 3-5 seconds... I will say..that when they were adjusting the 30mV's....that the green light was staying on..and would go off as it would