Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
hahhaaha Andy....it's a trying piece of equipment...same problem with the BC 9500...and we changed the C2103...and gave it a cleaning...to no avail....
-
I've got the exact same problem...the cleaning did not work....and there is no BnO service in the country where my equipment is....i'm at a complete loss...and about to give up ...
-
We did what was recommended somewhere on this site......we got the car polish with the "bug remover"...it's a very, very light rubbing compound....and didn't apply too much pressure....then finished with a polish only....they came out like new... my damn displays still dont work though....
-
With the gracious help of this board...we fixed the amp sections on both penta 2's...and they had the foam rot too.. We bought the foam rings from GoodHiFi...for $42 for all 8 rings....but i also had a set of 8 midranges that were rotten left over from some penta 1's... Strange thing...in South America...they re-foamed all 8 speakers...including
-
Thanks Graham... So, difficult to take apart and clean below???yes?? we've got dirt underneath....the plastic...
-
Exactly Keith !! so is there supposed to be a jumper there on the P114?? cause there is on these speakers..
-
How is the plastic cover of the very bottom base removed??? We need to clean and polish under them.... thanks,..
-
ahh....just to the right of that on page 2-3...the P114 from R47 up to P113-6... I beleive is the one in question...there are 3 legs down...and the tech tells me that there is a jumper between 2 of the legs... thanks Keith !!
-
Hi guys... On the...on the PCB 24 on the penta II....the P114 goes up to the jumper and on to P113-6 audio/video switch.. Which 2 legs is this jumper supposed to be between....??? THe displays are not working as of yet.... thanks !!!
-